Looking for a new oil pan, the one i got from MPS is leaking and i dont feel like getting another cheapo. in the future i will be upgrading my front suspension with either a griggs or MM K-member. can some of you guys please tell me which oil pans to look at which will work with an aftermarket k member and lowered suspension. also, how much labor is involved in the removal of the old one and installation of the new one as i am not sure how labor intensive this is going to be.
i am also looking at products to help strengthen my bottom end while it is going to be exposed. some suggestions on choosing a main support system and windage tray would also be much appreciated.
FYI i have been looking at D.S.S.'s products but I am not sure if any machining would be necessary. I am unfamiliar with these areas and your helpful suggestions will no doubt reinforce my purchasing decisions.
thanks in advance
Fawcett
1995 Mustang Gts 340bhp FRPP 302 w/HCI
13.3@103.6 on street tires before the t5 went
just installed, D&D viper spec t56, afm superking cobra clutch, afm alum flywheel, 3.73 gears
on the way tweecer r/t
and the parts listed above along with a Trick Flow Diff. Cover
i am also looking at products to help strengthen my bottom end while it is going to be exposed. some suggestions on choosing a main support system and windage tray would also be much appreciated.
FYI i have been looking at D.S.S.'s products but I am not sure if any machining would be necessary. I am unfamiliar with these areas and your helpful suggestions will no doubt reinforce my purchasing decisions.
thanks in advance
Fawcett
1995 Mustang Gts 340bhp FRPP 302 w/HCI
13.3@103.6 on street tires before the t5 went
just installed, D&D viper spec t56, afm superking cobra clutch, afm alum flywheel, 3.73 gears
on the way tweecer r/t
and the parts listed above along with a Trick Flow Diff. Cover