oil pressure guage install

[kingc]

Where should the oil pressure sender be installed on a 2000 gt i am using an auto meter electric oil pressre gauge.

Thanks!

 

[saleen556]

In the filter housing next to the oem sensor. There should be an allen plug to remove.

 

[kingc]

Is there some sort of difference on the 00 gt becuase i have been looking for that plug since last night and cant see it. I see the oem sensor but there is no plug.

 

[HP Addiction]

There is no secondary plug on a 2000. You will need to "t-off" the stock sender with the autometer sender. This will ensure the stock guage remains functional. That is what I did on mine... works perfectly.

 

[kingc]

Thank you very much that's what Ill do!! The oil pressure sender is way up there and on the back of the oil pump looks like a pita but I'll get it done.

If it wasnt for stangnet I'd be screwed......

Thanks again!

 

[RandyStinchcomb]

Thank you very much that's what Ill do!! The oil pressure sender is way up there and on the back of the oil pump looks like a pita but I'll get it done.

If it wasnt for stangnet I'd be screwed......

Thanks again!

or...and if you can't get to the stock oil sender, get a Romeo oil filter housing from a 1996 to 1998 Mustang (wthout the oil cooler) or a 2001 to 2004 filter housing as the Romeo oil filter housing is the one that has an extra hole for a second oil sender/gauge as talked about in an above thread