The best way I can think of would require some work. I would hook a mechanical gauge into the oil port (just in front of the oil filter). It would be kinda hard to get to with the motor in the car, and you would have to remove the oil sending unit. Then I would remove the distributor, get an electric drill, put a long extension on it with a small OD 1/4" deep well socket, and start cranking it (counter clockwise I believe). Just watch the gauge for pressure, depending on how fast your drill is turning (it will take a strong one) you should have at least 20psi I would say, my car as around 50 when it's running but drops to around 10-15 if it starts to idle too low (600-700).