Ok, I just dove head first..............

07gtfolife · May 8, 2007

I ordered the zex kit from brenspeed. After going back and forth on what mod I wanted to do, driveshaft, upd's, headers, s/c, I figured this was bang for the buck. Wish me luck.

kooldawg6 · May 8, 2007

Good Luck Just make sure she stays in one piece!

07gtfolife · May 8, 2007

Thanks man I am going to run a 75 shot when I first get it. Once I get tired of that I will run the 100 shot. I am not going over 100.

tom281 · May 8, 2007

You'll be fine...... just make sure the install and tune is done properly.

07gtfolife · May 8, 2007

tom281 said:
You'll be fine...... just make sure the install and tune is done properly.

Well as far as tune, Brent is doing that little numer, install, thats gonna be my dance. Shouldn't be to hard, I did my s/c on my 01 gt so I figure I got this one.

gashog · May 9, 2007

sweet man. good times are in your future.

07gtfolife · May 10, 2007

gashog said:
sweet man. good times are in your future.

Thanks man I can't freakin wait.

07gtfolife · May 11, 2007

Just got off the phone with Brent. Tune is on the way in a few and the kit should be here shortly after when ups does its delivery. I can not wait. I am here rocking out to tool waiting in my office. Soon as it gets here I am leaving to go do the install.

bigcat · May 11, 2007

thats the attitude! take pics and write some instructions as you go. be sure to add in the little tips that you used to make things easier. then you can add that to the write up thread.

07gtfolife · May 11, 2007

Well I think I am after all the son of Murphy (Murphy's Law, for the less savey) I got everything in, I go to download the new live load crap program and sct's website is down. So I am still in my office. waiting for this garbage to load. This is like sone kind of chinease torture. I wanted to get it in before night fall so I could make a few runs at the track tonight. ANGRY!!!!

tom281 · May 12, 2007

TOOL rocks! Sorry, just had to throw that in there..... saw them in September, seeing them again next month- can't wait! Oh if you talk to Brent again, tell him Tom says hello!

bigcat · May 12, 2007

planning on the colder plugs?

Khyron · May 15, 2007

Hey 07gtfolife - Any updates for us?

07gtfolife · May 15, 2007

Khyron said:
Hey 07gtfolife - Any updates for us?

Yeah I have been very busy but I got the kit on and its amazing, you'll see when I post pics. I ran with the 75 shot, I am most likey going to the track this weekend and running that. After that I am dropping the 100 in. The kit is great no complaints with the install pretty straight forward. My only complaint is all the bright purple but when I post my pics you will see what I did to solve that problem. 1st gear is pretty much useless now, my rpm's shoot up so fast I dont even know when to shift. 2nd gear also. It is difficult to keep the car straight in 3rd(I have stock tires). I deffinetly need to step up the meat on the back now.

I was testing the car out this morning on a straight away by my house and a freaking cop came by my house like an hour after I got to work and spoke to the wifey and said they were getting complaints about a black mustang speeding. She told him that the car is loud and that I dont speed around and that people get it confused with speeding. The cop told her he would be back by later. The one time I get on it by my house and there was probably an old man or old lady with nothing else better to do other than police the neighborhood, I freaking get caught. Oh well I doubt he'll come back, hopefully.

07gtfolife · May 15, 2007

tom281 said:
TOOL rocks! Sorry, just had to throw that in there..... saw them in September, seeing them again next month- can't wait! Oh if you talk to Brent again, tell him Tom says hello!

Yeah they are going to be here in June. I would love to go, but I dont think I am going to make it.

07gtfolife · May 15, 2007

bigcat said:
planning on the colder plugs?

I think I am going to, can I run a colder plug with the 93 tune with timing turned up or do I still have to run the nitrous tune?

Hoboattacker · May 15, 2007

It was on this site somewhere but what I think brenspeed said (don't quote me, but I think I read it here) was that they ran 87 octane tune with the HT0 plugs to be on the safe side. They still ran 93 gas, just on the 87 tune with nitrous.

07gtfolife · May 15, 2007

Hoboattacker said:
It was on this site somewhere but what I think brenspeed said (don't quote me, but I think I read it here) was that they ran 87 octane tune with the HT0 plugs to be on the safe side. They still ran 93 gas, just on the 87 tune with nitrous.

But colder plugs and that much timing lost from going to the 87tune, you really dont feel that much of a gain as you do with a nitrous tune. Thats how it felt for me when I put the 87 tune with 93 octane. Rolling start wasn't as aggressive (50 mph+).

gashog · May 15, 2007

so how do you have it setup? when you floor it? rpm? 2f2f button?

how does it feel when it hits?

Post pics buddy.

07gtfolife · May 15, 2007

gashog said:
so how do you have it setup? when you floor it? rpm? 2f2f button?

how does it feel when it hits?

Post pics buddy.

Its on the wot. It pretty much feels like the little 4.6 just turned into a 7.0 and is asking to be let loose to cause mayhem. I will most likey get some pics up tomorrow. It will be interesting to see everyones reaction on how I set it up. Total sleeper.

Ok, I just dove head first..............

New Member

mine works really well and can take a fair amount

New Member

New Member

New Member

Member

New Member

New Member

start with the upper hole, and if more traction is

New Member

New Member

start with the upper hole, and if more traction is

Member

New Member

New Member

New Member

New Member

New Member

Member

New Member

Similar threads

Privacy & Transparency

Privacy & Transparency