lazerred94stang New Member Aug 17, 2004 63 0 0 Wisconsin May 15, 2005 #1 May 15, 2005 #1 I was wondering if you guys could help me out on the install of an air/fuel guage. What wire would i tap into? Thanks For your help
I was wondering if you guys could help me out on the install of an air/fuel guage. What wire would i tap into? Thanks For your help
lazerred94stang New Member Aug 17, 2004 63 0 0 Wisconsin May 15, 2005 #2 May 15, 2005 #2 one more thing the car is a 97 Mustang Cobra
S SirRyan135 New Member May 17, 2005 3 0 0 May 18, 2005 #6 May 18, 2005 #6 HI am trying to do the same thing but having troubles with the o2 sensor wiring. Need to know what wire I need to splice into. I know someone knows this please help me out.
HI am trying to do the same thing but having troubles with the o2 sensor wiring. Need to know what wire I need to splice into. I know someone knows this please help me out.
Pertums Member Oct 31, 2003 174 0 16 NY May 18, 2005 #7 May 18, 2005 #7 on my '00 GT it was the following: Pin 87 on the PCM (red/black stripe wire) for the left front side or Pin 60 on the pcm (Gray/lite blue stripe wire) for the right front side. i'm not sure if the computer harness wires will be the same though. your best bet is to try to find the eecv pinout chart for your year car.
on my '00 GT it was the following: Pin 87 on the PCM (red/black stripe wire) for the left front side or Pin 60 on the pcm (Gray/lite blue stripe wire) for the right front side. i'm not sure if the computer harness wires will be the same though. your best bet is to try to find the eecv pinout chart for your year car.
lazerred94stang New Member Aug 17, 2004 63 0 0 Wisconsin May 20, 2005 #8 May 20, 2005 #8 where can i find this pinout chart?