One Piece 87-93 Headlights

[Checkmate]

Does anyone know how to properly adjust the new one piece headlights that they are making for the 87-93 Mustang? I bought mine at Mustang Tuning.

 

[koniu77]

die grinder and spacers

 

[bryce93lx]

step one: remove one piece headlights
Step Two: run Them over with lage piece of machinery( d8 cat works well)
Step three: burn the broken pieces
Step four : Piss on the ashes(melted wad of plastic)
Step five : install three piece headlights
Step six: adjust with the proper end wrench with the adjusting blots

done, all in six easy fun steps

Tune in next week to find out how to adjust the gaint aluminum wing on your trunk for maximum traction in a fwd car....

 

[SHAOLINFOX30]

step one: remove one piece headlights
Step Two: run Them over with lage piece of machinery( d8 cat works well)
Step three: burn the broken pieces
Step four : Piss on the ashes(melted wad of plastic)
Step five : install three piece headlights
Step six: adjust with the proper end wrench with the adjusting blots

done, all in six easy fun steps

Tune in next week to find out how to adjust the gaint aluminum wing on your trunk for maximum traction in a fwd car....

So enlightening... its nice to know one can get some good advice w/out sarcasm on the internet:Zip2:

 

[FastDriver]

step one: remove one piece headlights
Step Two: run Them over with lage piece of machinery( d8 cat works well)
Step three: burn the broken pieces
Step four : Piss on the ashes(melted wad of plastic)
Step five : install three piece headlights
Step six: adjust with the proper end wrench with the adjusting blots

done, all in six easy fun steps

Tune in next week to find out how to adjust the gaint aluminum wing on your trunk for maximum traction in a fwd car....

ROFLMFAO! love the last comment.

 

[wythors]

While I actually laughed out loud at Bryce's post, the non-smartass answer is that they have no adjustment.

They are Chinese made garbage that shouldn't be on a Mustang, unless said Mustang has Alteeza tail lights and extra wide chrome fender moldings.

 

[90stang5speed]

While everyone has their opinion on the one piece headlights, mine have a screw on the back to adjust for up & down. I’m guessing left to right would have to be done with shims as needed. I haven’t installed mine yet so I can’t speak of quality yet. I got them because a guy backed his truck into my car & crushed the Dr side lights. Since someone else paid for the parts it won’t hurt my feelings if I put them in & don’t like them. I was going to replace them at some point anyway as the redneck retard that I bought the car from had drilled holes through the front to drain water out.

 

[Blinky1971]

they do aim low put mine in the other day.....no real adjustment.

 

[jdb3rd]

To each his own but I will say I have talked to a few people who have told me they were not adjustable and or they leaked from day one. I will say I was intrigued at first when I saw pics in the magazines but when I finally saw them in person it was definitely a no in my book