One Piece At A Time....just Like Dave!

Black1987 · Aug 25, 2017

Just fyi I didn't know clay bar removes overspray on windows and such. For detailing Jax Wax is good stuff, but don't buy their foam gun....their manufacture on Amazon sells the foam gun for like $15 instead of $60+

Great work sir!

Mstng93SSP · Aug 26, 2017

Ok guys, I have not been happy with my paint job. I don't know..maybe i'm just too picky but I saw flaws...lots of them. I was actually getting depressed. So, I decided to do something about it. Meet my new best friends

I laid down some cash and got a really nice Dewalt buffer with adjustable rpm. I then went for the 3M compound and polish and got busy. I must say, you really do get what you pay for. That 3M stuff is amazing. I spent 9 hours wetsanding and buffing and the results are more than I could have hoped for! I started with 1500 wet, then 3000 wet, then compound then polish. Here are my results.

Roof

Rear quarter in progress

Finished product.

Is it show quality? Hell no! Is it presentable? Hell Yeah!

Mstng93SSP · Aug 26, 2017

Before I forget, I got my marti report. I was actually disappointed. It didn't really tell me a whole lot I didn't already know. I thought it would have told me how many SSP cars in royal blue there were. You know, like your car is 1 of (x) number of ssp cars in royal blue. It didn't. Myabe I expected too much? I'm not saying the report isn't a cool thing because it is. But for $50+ I didn't find out a whole lot of new info except for date scheduled and date built. Kind of a bummer for me.

Steel1 · Aug 26, 2017

Nice job! Cutting and buffing takes a lot of time but with a little knowledge and hard work the results can be quite satisfying.
I see you started with a wool pad, what color foam pad did you finish with?

General karthief · Aug 26, 2017

With the marti report you have info on paper, I really don't believe what people say about their cars unless I see it.

Davedacarpainter · Aug 26, 2017

If you want all of the detail stuff from Marti, you have to pony up for the $250 report. I will eventually get that for my blue car. They'll let you upgrade with a discount for the report you've already bought.

You used almost exactly what I use at work Chris. Dewalt buffer, 3M products (though I'm getting ready to switch over to Mcguires stuff). There's a third step you'll want to use with 3M. They have a swirl mark remover that uses a blue foam pad and a blue swirl mark remover glaze. It'll take out the swirls from the grey pad and glaze that I assume you used to this point.

Trust me on this, it will give you that clean and clear look you are after.

Mstng93SSP · Aug 26, 2017

Thanks Dave. Yes that is what I used so far. I can get the blue pad and swirl remover. All of the 3M stuff was on sale. Each bottle was $30ish? I thought that was reasonable. I love the results now, I can only imagine after the third step.

Davedacarpainter · Aug 26, 2017

Mstng93SSP said:
Thanks Dave. Yes that is what I used so far. I can get the blue pad and swirl remover. All of the 3M stuff was on sale. Each bottle was $30ish? I thought that was reasonable. I love the results now, I can only imagine after the third step.

That's a very good price, I think we pay in the mid forties at the shop.

Mstng93SSP · Aug 26, 2017

Yeah I was shocked at the price. I better go grab the swirl mark remover today. Just curious, why are you switching over to Meguire products?

Davedacarpainter · Aug 26, 2017

I started using it doing some side work because that's what the guy had to use. Turns out I really like it. The compound cuts a little quicker and the polish brightens up the finish a little better to me.

The only reason I hadn't used it before is complacency with 3M products. They worked, so I didn't give it much other thought.

3Ms stuff used to be the best. It's still very good too. I just stop checking out other products.

Mstng93SSP · Aug 27, 2017

Pretty sure I just sold my 91 hatchback? A guy I know stopped by, looked at it and asked if I would sell it. I threw out 5k off the top of my head. He said he would take it. Checked with my daughter, she said sell it. We have two other foxes she can drive. We will see if he shows up with the cash. I think he will.

Davedacarpainter · Aug 27, 2017

Since he accepted the $5k so quick, do you wish you would have said $6k?

Mstng93SSP · Aug 27, 2017

Maybe? At 5k I'm making money on the car so it's all good to me.

NIKwoaC · Aug 27, 2017

Man I love seeing garage-painted cars. Great work man.

Mstng93SSP · Aug 27, 2017

Thanks!!

Mstng93SSP · Aug 27, 2017

@Davedacarpainter For the swirl mark remover, what rpm do you buff at?

Davedacarpainter · Aug 27, 2017

Oh, 1400ish. It doesn't take much. Maybe three or four smooth passes over the area? Be sure to wipe each area with a super soft cloth as you use it.

One problem with the blue swirl mark remover is that it dries to the point of having to go back with the grey if you don't wipe the residue off.

Davedacarpainter · Aug 27, 2017

Someday, i want to win the lottery so I can come to hawaii for a mustang night.

Mstng93SSP · Aug 27, 2017

Yeah dude. But I would probably put you to work

Mstng93SSP · Aug 29, 2017

Worked on this headache over the weekend. Glad it's done.

One Piece At A Time....just Like Dave!

my wife Bedazzled my input shaft

You have a nice rear end there Dave.

You have a nice rear end there Dave.

Mustang Master

wonder how much it would cost to ship you a pair

Chicks can make things hard if they’re inspired...

You have a nice rear end there Dave.

Chicks can make things hard if they’re inspired...

You have a nice rear end there Dave.

Chicks can make things hard if they’re inspired...

You have a nice rear end there Dave.

Chicks can make things hard if they’re inspired...

You have a nice rear end there Dave.

中國製造

You have a nice rear end there Dave.

You have a nice rear end there Dave.

Chicks can make things hard if they’re inspired...

Chicks can make things hard if they’re inspired...

You have a nice rear end there Dave.

You have a nice rear end there Dave.

Similar threads

Privacy & Transparency

Privacy & Transparency