• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Opinions?

  • Thread starter Thread starter crazyhorse89
  • Start date Start date Mar 28, 2006

crazyhorse89

New Member
Dec 9, 2005
30
0
0
Bay City, TX
Mar 28, 2006
#1
  • Mar 28, 2006
  • #1
Tested the stang once again, got on it pretty good, have some issues I need some expert opinions on, First, when I was accelerating and reached about 5600rpm, car felt like it shuddered or vibrated, what could this be? Too much rpm, or fuel starvation? I have the MSD 6a and was thinking maybe the box had a preset rpm limiter? Anyone know? Would I also have to bump my timing down to 12 or 10 degrees with the box, and my current set up? Thanks for replies.
 
9

93 331 GT

Member
Mar 5, 2006
60
0
7
Jackson, NJ
Mar 28, 2006
#2
  • Mar 28, 2006
  • #2
The 6A does not have a rev limiter, so MSD created the 6AL which is the same as the 6A just has a soft touch rev control. As far as the vibration, does it feel like a loss of power, (rpm's not getting any higher). I see you plan to upgrade to a 140 alternator, you may need it now. the 6A pulls 1amp per 1,000 rpm. what model is your electric fan. I had one out of a lincoln Mark VIII, and believe it or not, it was drawing almost 50 amps! Stock alternators are only good for about 75 amps (depending on the model). with everything running you might not have enough juice to support the car. If you have the money get a Digital 6. it draws .7 amps per 1,000 allows you to adjust timing from the box, and is more compact with a higher output rating. I know this because I have researched all of MSD's boxes and have decided to use it, because it its the best street box they make. to add your timing has no effect on the box. it delivers energy when the car is supposed to spark, so when ever the spark plug fires, the energy is released. you would have to add a timing control to have the box to affect the ignition system.
 
You must log in or register to reply here.

Similar threads

Resolved 93 Mustang 5.0 - Cranks but does not start
  • dan50
  • Jul 18, 2026
  • Fox 5.0 Mustang Tech
Replies
6
Views
491
Fox 5.0 Mustang Tech Jul 18, 2026
dan50
R
1974 Datsun 620 pickup / 5.0L HO
  • RJH46
  • Aug 24, 2025
  • Other Auto Tech
Replies
1
Views
424
Other Auto Tech Aug 24, 2025
Noobz347
8
Engine Rough idle and aggressive sputtering when accelerating
  • 88vertible
  • Aug 13, 2025
  • Fox 5.0 Mustang Tech
Replies
4
Views
1K
Fox 5.0 Mustang Tech Dec 13, 2025
Jarhead67
J
S
Preparation for Holley Terminator X install – Foxbody 306 (electrical fan, alternator, MSD Ignition, etc)
  • So_Flo
  • Mar 1, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
22
Views
3K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 4, 2026
General karthief
G
2006 Mustang GT o2 Sensor Wiring Issue Car Bogging/Choking
  • GCantero93
  • Sep 5, 2025
  • 2005 - 2009 Specific Tech
Replies
4
Views
1K
2005 - 2009 Specific Tech Sep 6, 2025
Noobz347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?