So, having what seems to be the longest project in history going on with my 351 swap, I ordered what I believe to be the last major parts of the job today, as well as a few other peices for my truck.
On the way is:
Hedman Husler Headers, 1 3/4" with 3 inch collector
Centerforce Dual Friction Clutch
Strange 10 Way Adjustables
Hellwig 1 3/8" Front Swaybar
Hellwig 1" Rear Swaybar
In the storage room
Granatelli Tubular K-member
Granatelli Lightweight A-arms
Granatelli Coilover kit w/ 300lb spring rate
S&W Racecars 8 point roll cage
Moroso 351 Swap Pan
Roush Rear Lower Control Arms
(Probably more, but I'm not in the storage room yet)
My Saleen wheels will be picked up on the 4rth, I'll get pictures of that when they're on.
Once the shipped parts get here, I have a work party of 4 or 5 REALLY enthusiastic guys ready to slam into it. I don't have a choice, I NEED to get this finished because....
I just found out that as of July 10th, 2010, I'm posted to Alberta. If I don't get this car running before I leave Ontario, I'm going to be pi$$ed.
I'll be towing the car, on the trailer for 2500 or so miles.
That said, while towing a buddy's car the other day, I noticed that the back of my F150 sags a bit since I put the levelling kit on it...and the 4.6 could use a little bit more power as well - the exhaust and intake don't do much without a tune.
To remedy that, I ordered up a Hellwig Load Leveller and an Edge Evolution tuner, which should fix the sag and power problems.
End result is.....I hope....HOPE....that the next 4 weeks will have many many updates in store for you guys, finally!
Sorry for the long read...
On the way is:
Hedman Husler Headers, 1 3/4" with 3 inch collector
Centerforce Dual Friction Clutch
Strange 10 Way Adjustables
Hellwig 1 3/8" Front Swaybar
Hellwig 1" Rear Swaybar
In the storage room
Granatelli Tubular K-member
Granatelli Lightweight A-arms
Granatelli Coilover kit w/ 300lb spring rate
S&W Racecars 8 point roll cage
Moroso 351 Swap Pan
Roush Rear Lower Control Arms
(Probably more, but I'm not in the storage room yet)
My Saleen wheels will be picked up on the 4rth, I'll get pictures of that when they're on.
Once the shipped parts get here, I have a work party of 4 or 5 REALLY enthusiastic guys ready to slam into it. I don't have a choice, I NEED to get this finished because....
I just found out that as of July 10th, 2010, I'm posted to Alberta. If I don't get this car running before I leave Ontario, I'm going to be pi$$ed.
I'll be towing the car, on the trailer for 2500 or so miles.
That said, while towing a buddy's car the other day, I noticed that the back of my F150 sags a bit since I put the levelling kit on it...and the 4.6 could use a little bit more power as well - the exhaust and intake don't do much without a tune.
To remedy that, I ordered up a Hellwig Load Leveller and an Edge Evolution tuner, which should fix the sag and power problems.
End result is.....I hope....HOPE....that the next 4 weeks will have many many updates in store for you guys, finally!
Sorry for the long read...