Outer tie rod purchase

limp · Jun 30, 2022

Installing SN95 spindles on my 83.. Should I buy the 94/95 outer tie rod ends?
My steering rack is an 03 with the 83 inner tie rods installed.....

Part numbers for the 94/95 outer tie rod ends are different than 93 back..
What has everyone else on here done??

KRUISR · Jun 30, 2022

I used my foxbody ones. The difference between foxbody and SN95 tie rods is the threads between the inner and outer, foxbody are SAE threads, SN95 are metric threads. If you use SN95 outers, you need SN95 inners. The SN95 inner/out combination is too long for a foxbody unless you have done SN spindles AND control arms.

Shakerhood · Jun 30, 2022

I used Fox on mine.

limp · Jul 1, 2022

KRUISR said:
I used my foxbody ones. The difference between foxbody and SN95 tie rods is the threads between the inner and outer, foxbody are SAE threads, SN95 are metric threads. If you use SN95 outers, you need SN95 inners. The SN95 inner/out combination is too long for a foxbody unless you have done SN spindles AND control arms.

Just what I was looking for..... Thank you....

Dan02gt · Jul 1, 2022

Consider going with a Steeda or MM bump steer kit instead of standard outer tie rod ends. That way you can dial in your bump steer as you mod your suspension.

Outer tie rod purchase

limp

wrap a little cheese around it and its a done

KRUISR

Shakerhood

limp

wrap a little cheese around it and its a done

Dan02gt

mazing how much gas smell came from that tiny hole

Similar threads

Outer tie rod purchase

limp

wrap a little cheese around it and its a done

KRUISR

Shakerhood

limp

wrap a little cheese around it and its a done

Dan02gt

mazing how much gas smell came from that tiny hole

Similar threads

Privacy & Transparency

Privacy & Transparency