• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Overdrive Alternator Pulley... anyone used a capacitor

  • Thread starter Thread starter AnthonyR23
  • Start date Start date Apr 18, 2007

AnthonyR23

Member
Sep 8, 2006
661
0
16
Ontario
Apr 18, 2007
#1
  • Apr 18, 2007
  • #1
Anyone know what number my chargine should be at... sits at about 13... I'm guessing it should be 14.. but is 13 a little too low or should that be ok... I just ordered a overdrive pulley so hopefully that helps.. Car starts up but just don't want to get stuck somewhere... I have a battery charger so I throw that on once in awhile, especially when the car just sits... anyone ever used a capacitor?

3G 130amp Alt., Mark 8 fan, Underdrive Pulleys, Cold Air Intake, A/C eliminated, BBK equal length headers, on mainly stock 88 mustang gtc with speed density.

How do I add cars info in the tag so I don't have to write it every time?
 

stang&2Birds

Founding Member
May 4, 2000
2,091
5
58
New England. :-) CT/MA
Apr 18, 2007
#2
  • Apr 18, 2007
  • #2
AnthonyR23 said:
How do I add cars info in the tag so I don't have to write it every time?
Click to expand...
Click on the "User CP" link near the top[ of your page and add a signature.


AnthonyR23 said:
anyone ever used a capacitor?
Click to expand...
A capacitor won't help. Capacitor help mostly in holding a charge for WELL UNDER 1 second. In some very low power applications, big capacitors ("ultra/super capacitors) may hold a charge for 2-60 secs.

Get an overdrive pulley. With your lights, AC, rear windows defogger off, your car battery should be above 14V. But, the stock gauge is NOT accurate. You need a digital volt meter - $15 from Walmart, etc.

Under-drive pulley are horrible for charging systems. You really need to put an overdrive pulley on the alternator when you have an under-drive crank pulley.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Apr 18, 2007
#3
  • Apr 18, 2007
  • #3
I'm with Stang&2Birds on this one.

Your battery is as close to a capacitor as you're going to get for this application.
Good advice about measuring actual voltage (with a real gauge/meter). Between gauge hysteresis and voltage drops in these 20 year old cars, you can't really know what's going-on otherwise.

Monte Smith has some info on overdrive pulley sizes on his alternator page.
A 3G's critical speed is about 15K RPM, so be mindful of that when crunching ratios to decide upon the best size.

Good luck.
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,255
17,939
224
Massachusetts
Apr 18, 2007
#4
  • Apr 18, 2007
  • #4
Anything over 12V is charging your battery, so 13V is still fine, it's not low.

If you are reading 13V at idle then it's good enough, when you drive and engine rpm's climb, the increased revs will put out more voltage, around 14.4V
 
You must log in or register to reply here.

Similar threads

F
Electrical From scratch: alternator wiring
  • fox racer v2
  • Jun 23, 2025
  • Fox 5.0 Mustang Tech
Replies
0
Views
573
Fox 5.0 Mustang Tech Jun 23, 2025
fox racer v2
F
Engine on3 Conversion to draw through MAF?
  • sav22rem22
  • Oct 11, 2025
  • Fox 5.0 Mustang Tech
Replies
2
Views
271
Fox 5.0 Mustang Tech Oct 11, 2025
sav22rem22
S
Preparation for Holley Terminator X install – Foxbody 306 (electrical fan, alternator, MSD Ignition, etc)
  • So_Flo
  • Mar 1, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
22
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 4, 2026
General karthief
M
Resolved 1988 Foxbody - Overheating Summer
  • MDrisc
  • Oct 26, 2025
  • Fox 5.0 Mustang Tech
Replies
16
Views
681
Fox 5.0 Mustang Tech Jul 17, 2026
fasterthangas
F
A
Resolved 03 GT Parasitic Draw Fuse 26 (PCM)
  • Antrix
  • Mar 22, 2025
  • SN95 4.6L Mustang Tech
Replies
2
Views
704
SN95 4.6L Mustang Tech Mar 24, 2025
89ripper
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?