• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

p/s pump help asap please

  • Thread starter Thread starter stangster50
  • Start date Start date Feb 25, 2007

stangster50

New Member
Nov 19, 2006
129
0
0
cranston ri
Feb 25, 2007
#1
  • Feb 25, 2007
  • #1
tryin to swap pumps... does the damn hex bolt in the center of the pulley need to come off?. ive tried on both pumps, and neither move.. they just want to strip..
 
M

Mike92GT

Founding Member
Jan 23, 2002
583
0
0
Florida
Feb 25, 2007
#2
  • Feb 25, 2007
  • #2
The hex is not a bolt, it's part of the power steering pump shaft. The pulley is pressed onto the shaft, and it's a pretty tight fit. You need a power steering puller to remove the pulley, and an installer to press the pulley onto the new pump.
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Feb 25, 2007
#3
  • Feb 25, 2007
  • #3
ou will need to rent or buy a PS steering puller. The PS pulley has a ridge that the puller seats on. Then you crank the screw on the middle of the puller to get the pulley off the shaft.



You can rent the tool at Autozone or other auto parts stores.

I have used a bearing separator & harmonic balancer puller together to do the job.

Use this tool to put it back on...



I usually just use the bolt that comes with the new PS pump.
 

Shakerhood

20+ Year Stangneter
Oct 28, 2004
3,361
211
114
Ohio
Feb 27, 2007
#4
  • Feb 27, 2007
  • #4
Dont forget to use ONLY Type F Fluid when you go to refill your system after your pump change.
 

Roland69

Sergeant Tangnet
Sep 17, 2005
2,867
3
58
Port Elgin, Ontario
Feb 27, 2007
#5
  • Feb 27, 2007
  • #5
the bolt that comes with the new pump is kinda weak I broke one doing a P/S pump on a 2000 F-250...we ended up using the tool posted above
 
S

superhuaman

New Member
Nov 8, 2004
907
0
0
Harrisburg, PA
Feb 28, 2007
#6
  • Feb 28, 2007
  • #6
Shakerhood said:
Dont forget to use ONLY Type F Fluid when you go to refill your system after your pump change.
Click to expand...

type f?? i thought that was only used on the thompson style pumps. our cars use the newer style with plastic reservoir. i was told by the dealer to use atf type 3 and not that clear "power steering fluid" crap from the auto parts store.
 

Shakerhood

20+ Year Stangneter
Oct 28, 2004
3,361
211
114
Ohio
Feb 28, 2007
#7
  • Feb 28, 2007
  • #7
superhuaman said:
type f?? i thought that was only used on the thompson style pumps. our cars use the newer style with plastic reservoir. i was told by the dealer to use atf type 3 and not that clear "power steering fluid" crap from the auto parts store.
Click to expand...

If you own a Fox Stang it takes Type F Fluid, I believe 96 or 98 was the change off of Type F.
 
S

superhuaman

New Member
Nov 8, 2004
907
0
0
Harrisburg, PA
Feb 28, 2007
#8
  • Feb 28, 2007
  • #8
ah ok hmm
 

Shakerhood

20+ Year Stangneter
Oct 28, 2004
3,361
211
114
Ohio
Feb 28, 2007
#9
  • Feb 28, 2007
  • #9
http://www.fcsdchemicalsandlubrican...=Power Steering Fluid&category=Steering Fluid


If you look in your Owners Manual it will tell you Type F
If you look in the Service Manual it will tell you Type F
If you look at the Link above it tells you Type F is for the Pre 96-98 Time Frame.
 
S

superhuaman

New Member
Nov 8, 2004
907
0
0
Harrisburg, PA
Mar 1, 2007
#10
  • Mar 1, 2007
  • #10
ok, ill have to stop using type f
 

Shakerhood

20+ Year Stangneter
Oct 28, 2004
3,361
211
114
Ohio
Mar 2, 2007
#11
  • Mar 2, 2007
  • #11
Use what you want, just trying to get everyone to use the correct stuff so they dont have problems in the future.
 
You must log in or register to reply here.

Similar threads

B
Idler pulley as substitute for Power Steering Pump ?
  • Bhenders
  • Jul 15, 2026
  • Other Auto Tech
Replies
5
Views
371
Other Auto Tech Jul 16, 2026
LILCBRA
D
Loud noise(s) from Engine Bay
  • DuluthFoxbody
  • Oct 25, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
14
Views
403
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Nov 5, 2026
AeroCoupe
1999 Mustang GT - No Start- Need help understanding the fuel pump circuit and how it works
  • 99gtGuy
  • Nov 4, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
1
Views
655
1996 - 2004 SN95 Mustang -General/Talk- Nov 7, 2025
04newedge-
0
1987 Mustang GT Mass Air Conversion Help
  • mustangmike6996
  • Jan 1, 2025
  • Fox 5.0 Mustang Tech
  • 2
Replies
21
Views
2K
Fox 5.0 Mustang Tech Feb 4, 2025
mustangmike6996
B
'03 GT Fuel Pump/Pressure/Delivery Issue
  • Brodach
  • Oct 21, 2025
  • SN95 4.6L Mustang Tech
Replies
8
Views
1K
SN95 4.6L Mustang Tech Oct 31, 2025
gkomo
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?