• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

P/S pump removal

  • Thread starter Thread starter jmd2914
  • Start date Start date May 6, 2006
J

jmd2914

Founding Member
Sep 6, 2002
937
0
0
Napa, California
May 6, 2006
#1
  • May 6, 2006
  • #1
alright im starting to do my rack & pinoin/ps pump/ spring swap and i cant get the old pump off, it wont slide all the way off the bolt that holds it on because it hits the fan shroud. anyone know how to get it off?
 

TomCat

New Member
Apr 19, 2005
412
0
0
Utah
May 6, 2006
#2
  • May 6, 2006
  • #2
Take off the fan shroud... if that stud is too long, I don't think you have much of a choice.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
May 6, 2006
#3
  • May 6, 2006
  • #3
I dont recall removing the fan shroud or having that issue. If Brandon thinks it's possible, then go for it. Otherwise, I was thinking that to make sure you're removing the correct bolt.

Good luck.
 
J

jmd2914

Founding Member
Sep 6, 2002
937
0
0
Napa, California
May 6, 2006
#4
  • May 6, 2006
  • #4
yeah i have all the bolts out, the thing stopping me is that the stud is too long for the pump to slip off over it without hitting the shroud. is there anyway to take the shroud off without taking the stock fan out? or do i just have to unbolt the fan and then unbolt the shroud?
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
May 6, 2006
#5
  • May 6, 2006
  • #5
Since you already have the belt off, it doesn't take but about 10 minutes to remove the fan & shroud. The fan unbolts and then remove the shroud. It almost takes longer to tell how to do it than to do it.
 
F

FrumRoll

New Member
Mar 19, 2006
38
0
0
May 6, 2006
#6
  • May 6, 2006
  • #6
Just remove the stud, atleast that's what I did. If you don't need the stud anymore throw a vice grips on there, otherwise just throw two nuts on there and back it out.
 
J

jmd2914

Founding Member
Sep 6, 2002
937
0
0
Napa, California
May 7, 2006
#7
  • May 7, 2006
  • #7
tried using two nuts to back it off but i think i'll just take the fan off really quick because it wont take that long.
 
You must log in or register to reply here.

Similar threads

Resolved 93 Mustang 5.0 - Cranks but does not start
  • dan50
  • Jul 18, 2026
  • Fox 5.0 Mustang Tech
Replies
6
Views
493
Fox 5.0 Mustang Tech Jul 18, 2026
dan50
B
water pump installation questions
  • B0udreaux
  • Feb 5, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
38
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Feb 28, 2026
General karthief
B
'03 GT Fuel Pump/Pressure/Delivery Issue
  • Brodach
  • Oct 21, 2025
  • SN95 4.6L Mustang Tech
Replies
8
Views
1K
SN95 4.6L Mustang Tech Oct 31, 2025
gkomo
Drivetrain 83’ Glx convertible C5 Trans help!
  • JacksonJared2113
  • Dec 25, 2025
  • Fox 5.0 Mustang Tech
Replies
2
Views
542
Fox 5.0 Mustang Tech Dec 26, 2025
JacksonJared2113
E
Finished my Fox Hydroboost Install - Tips
  • Engineer Duane
  • Apr 9, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
4
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 5, 2025
Engineer Duane
E
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?