parking light

The lights up front all use a single ground wire that bolts down on the top radiator support near the radiator hold down bracket. Make sure it hasn't broken off or come loose. There is one ground wire for each side.

In the picture the ground wire is near the 2005 date.
Passenger side shown, driver's side ground wire is in a similar location.
7.jpg
 
One single ground per side serves the parking, headlights and turn signals.


No info about your car's model year, EFI or carb, no mods listed. Makes it hard to troubleshoot when we don't know what you have.

Therefore, no clue as to which wiring diagram you need. The wiring changed several times between 79 & 95.


That's why it is a good idea to use the sig under the user control panel (User CP) option. It allows you to post your car year & mods, which help greatly when troubleshooting things. No, it is not there for us to snoop and see any "Secrets" you have hidden away under the hood. Be a good stangnetter and update you sig for future reference & don't keep us guessing.

AutoZone wiring diagrams

AutoZone.com | Vehicle Selection - Year for 79-88 model Mustangs

AutoZone.com | Vehicle Selection - Year for 89-93 model Mustangs

AutoZone.com | Vehicle Selection - Year for 94-98 model Mustangs
 
AutoZone wiring diagrams

AutoZone.com | Vehicle Selection - Year for 79-88 model Mustangs

AutoZone.com | Vehicle Selection - Year for 89-93 model Mustangs

AutoZone.com | Vehicle Selection - Year for 94-98 model Mustangs

If your problem only affects one side, you have some wiring problems associated with that side. Look closely at the wiring, grounds and connectors for that side.

If the problem affects both side the same way, you have problems with the switches or switch wiring. Look closely at the multifunction switch and its asscoiated wiring. A word of caution about multifunction switches is in order here. The multifunction switch (high/low beam, wiper, turn signals) are different for different years. 87-98 will work in any 87-89 car. The 90-93 switches only work in 90-93 cars. You can't put an early model switch in a late model car, nor can you put a late model switch in an early car.

Supposedly you can move the pins around to make the switches work in model years that are different from the car the switch came out of. I cannot verify that and haven’t tried it .

Other possible problem sources for the turn signal malfunction are the ignition switch, multifunction switch and the plastic shell that holds the turn signal wiring connector pins.


Specific diagram for your car's lighting circuit...

0900c15280069682.gif