• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

Part number

  • Thread starter Thread starter Bossxr8
  • Start date Start date Feb 6, 2010
B

Bossxr8

New Member
Feb 6, 2010
4
0
0
Feb 6, 2010
#1
  • Feb 6, 2010
  • #1
Can someone please help me out with a part number for an inlet manifold gasket for a 5.0 HO Mustang. The one that fits between the stock upper and lower manifold.

Cheers.
 

BlownFiveLiter

have car, will race....wait, it doesn't run
15 Year Member
Nov 29, 1999
3,133
18
108
Chicagoland
Feb 6, 2010
#2
  • Feb 6, 2010
  • #2
Mr Gasket 148 - $6.95 at SummitRacing.com
 
B

Bossxr8

New Member
Feb 6, 2010
4
0
0
Feb 6, 2010
#3
  • Feb 6, 2010
  • #3
I really need a factory part number, any help would be appreciated.
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,372
18,120
224
Massachusetts
Feb 6, 2010
#4
  • Feb 6, 2010
  • #4
I get the sense you are located in Australia?? Or perhaps somewhere else where this isn't stocked at your local Autozone?
 
B

Bossxr8

New Member
Feb 6, 2010
4
0
0
Feb 7, 2010
#5
  • Feb 7, 2010
  • #5
Yes I am. I've got someone coming over here from the US, and its a lot easier for them to get me a gasket from a Ford dealer than it is to arrange mail order.

To get a gasket sent here would cost $45. Thats ridiculous. Almost as ridiculous as the mark up Ford Australia adds to the cost of 5.0 parts down here for the Falcon, even with employee discount. Try $50 for a rocker cover gasket for starters.
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,372
18,120
224
Massachusetts
Feb 7, 2010
#6
  • Feb 7, 2010
  • #6
Just tell them to walk into any Autozone and get this p/n. It's the Felpro gasket, prob the same as OEM, which is more than likely discontinued now from the Ford dealer. In fact i would almost garantee it's discontinued by now.

AutoZone.com | Vehicle Selection | Year

Felpro P/N MS94555 $9.99 USD

That's a stock intake manifold plenum gasket for an 86-93 5.0 HO manifold, but check the link above to see if this is the one you need. I beleive Felpro makes the OEM gaskets anyway

The entire gasket kit with the gaskets for the lower is like $15 if you want to spring for that.
 
B

Bossxr8

New Member
Feb 6, 2010
4
0
0
Feb 8, 2010
#7
  • Feb 8, 2010
  • #7
Thanks mate.
 
You must log in or register to reply here.

Similar threads

D
For Sale 1993 Mustang LX for parts or restore
  • diesel farmer
  • Oct 6, 2026
  • Fox Body Mustangs For Sale (1979-93)
Replies
0
Views
418
Fox Body Mustangs For Sale (1979-93) Oct 6, 2026
diesel farmer
D
W
2016 Mustang GT fuel tank leak
  • Waynetk16
  • Oct 8, 2026
  • 2015 - 2023 (S550) Mustang -General/Talk
Replies
1
Views
136
2015 - 2023 (S550) Mustang -General/Talk Oct 9, 2026
gkomo
Electrical need help with a part number
  • alutwon
  • Jan 27, 2026
  • Fox 5.0 Mustang Tech
Replies
0
Views
169
Fox 5.0 Mustang Tech Jan 27, 2026
alutwon
J
Exhaust manifold to Y-pipe nut & stud dimensions?
  • joeybuddy96
  • Jul 7, 2026
  • SN95 V6 Mustang Tech
Replies
2
Views
221
SN95 V6 Mustang Tech Jul 9, 2026
joeybuddy96
J
D
Question about EGR valve, replacement, and a part on the valve.
  • DPP
  • May 9, 2026
  • SN95 V6 Mustang Tech
Replies
1
Views
271
SN95 V6 Mustang Tech May 23, 2026
DPP
D
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?