http://cgi.ebay.com/ebaymotors/ws/e...=110448621708&viewitem=&_trkparms=tab=Selling
Starting bid is $995
Last set on the shelf, we took a set of bare Patriot Stage 2 Romeo CNC heads and did the following:
- installed our manganese bronze guides
- installed Ferrea stainless steel valves in 1.78" intake and 1.45" exhaust diameters
- installed TFS valve springs
- installed our Viton valve seals that seal the valve stem to guide much better than the oem seals
- CBN surfaced (mill) the head, intake, and exhaust gasket surfaces
- Gave heads multi angle performance valve job
Heads are assembled and ready to go with your cams, lifters, and rockers.
Starting bid is $995
Last set on the shelf, we took a set of bare Patriot Stage 2 Romeo CNC heads and did the following:
- installed our manganese bronze guides
- installed Ferrea stainless steel valves in 1.78" intake and 1.45" exhaust diameters
- installed TFS valve springs
- installed our Viton valve seals that seal the valve stem to guide much better than the oem seals
- CBN surfaced (mill) the head, intake, and exhaust gasket surfaces
- Gave heads multi angle performance valve job
Heads are assembled and ready to go with your cams, lifters, and rockers.