pcv system

dastang2

Active Member

Dec 11, 2003

2,020

0

46

tx

Jun 21, 2004

#1

• Jun 21, 2004

• #1

hello i drilled a hole and put a pcv valve in my car. it is on the drivers side of the motor over #8 cylinder. i have the hose running to the manifold vacuum. i plugged the little nipple that is on the oil fill tube. is this all i need for a pcv system or do i need to put some sort of filtered cap on the fill tube on the passenger side of the motor.

 

Mustang5L5

That is…until I whipped out my Bissell

Mod Dude

Feb 18, 2001

43,265

17,952

224

Massachusetts

Jun 21, 2004

#2

• Jun 21, 2004

• #2

Usually, the PCV is on one valve cover, and a breather or a tube to the air intake goes on the other one.

For my '85, i elminated the PCV and just run two breathers instead.

 

dastang2

Active Member

Dec 11, 2003

2,020

0

46

tx

Jun 21, 2004

#3

• Jun 21, 2004

• #3

ok don't they sell an oil cap that doubles as a crankcase air filter too for the stangs, i have the aluminum covers that comes off of the 87 GT

 

Mustang5L5

That is…until I whipped out my Bissell

Mod Dude

Feb 18, 2001

43,265

17,952

224

Massachusetts

Jun 21, 2004

#4

• Jun 21, 2004

• #4

You mean one of these?

 

dastang2

Active Member

Dec 11, 2003

2,020

0

46

tx

Jun 21, 2004

#5

• Jun 21, 2004

• #5

yep where do i get that and about how much are they motor looks good by the way. i try to put my motor as attachments and i never can get them to work. i need somebody to host them for me. especially after i just detailed the engine parts and upgraded to a torker II intake on friday.