pcv valve frequently coming loose

Blackened302

Active Member

Jul 21, 2005

1,439

0

36

South TX

Jul 2, 2007

#1

• Jul 2, 2007

• #1

because of another thread started by another member, i checked for vacuum leaks as the cause of a high/hanging idle.

turns out my pcv valve was partially out--pushing it back in fixed the problem, as a few of you gents mentioned.

took the car out for a spin today and noticed the idle was a little higher than i set it, again. sure enough, the pcv valve wasn't sitting properly again.

so... how do i get the pcv valve to stay in place?? silicone, or something?

i know the valve is the correct one--my buddy, who owns the shop my car was in after the headgasket dilema (nice guy, man, he lent me his lift, cherry picker, tools, AND lemme drive his shop truck around 'til we were done w/ my car), personally ordered the part, so i'm pretty damn sure it's the right one.

thanks, guys!

 

BlownFiveLiter

have car, will race....wait, it doesn't run

15 Year Member

Nov 29, 1999

3,133

18

108

Chicagoland

Jul 3, 2007

#2

• Jul 3, 2007

• #2

Probably needs a new grommet. 50resto has them for $6.95.

 

HISSIN50

"How long does it take to get help in here?

15 Year Member

Nov 29, 1999

31,179

34

129

Jul 3, 2007

#3

• Jul 3, 2007

• #3

Matt's right. Also, is it a Motorcraft part Paul? This is one time to order a Motorcraft grommet and PCV valve - they fit so tight that I normally have to use silicone spray to get the PCV valve to seat (and this tight interference fit keeps the grommet squeezed into the lower intake's boss tightly). Before I learned this I used parts store pieces and they fit loose.

Good luck brah.

 

Stanger007

Founding Member

Sep 26, 2001

2,015

2

46

Baton Rouge, LA

Jul 3, 2007

#4

• Jul 3, 2007

• #4

I gotta second HISSIN50 on this one. Went with a parts-store grommet on Sage2k's car and that sucker pushes out fairly easily. I went with the same grommet on my car and that sucker is in there good. It's a crap shoot.

Go Motorcraft and get 'er done right.

Wes

 

go-stang5.0

New Member

Jan 27, 2003

2,244

0

0

Glenview,Il

Jul 3, 2007

#5

• Jul 3, 2007

• #5

I dabbed some black rtv on mine and its been holding up fine. And it's still removable..it just takes a good tug.

 

Stanger007

Founding Member

Sep 26, 2001

2,015

2

46

Baton Rouge, LA

Jul 3, 2007

#6

• Jul 3, 2007

• #6

I just called Ford, here's a couple part #s (putting them in the wiki also). The local Ford doesn't stock them anymore, both have to be ordered.

PCV Grommet: F7CZ6A892AA $6.57
Supercoupe PCV Valve (Better PCV for boosted guys): EV127A $6.73

Wes

 

Blackened302

Active Member

Jul 21, 2005

1,439

0

36

South TX

Jul 3, 2007

#7

• Jul 3, 2007

• #7

thanks a bunch, gentlemen!

gonna do this asap!

 

M

mackey

Active Member

Jan 25, 2003

1,284

1

38

Beverly, Massachusetts

Jul 3, 2007

#8

• Jul 3, 2007

• #8

I just used a heavy grease.

No problems so far.

 

gcomfx.com

Founding Member

Oct 22, 2002

3,690

0

56

Republic, MO

Jul 3, 2007

#9

• Jul 3, 2007

• #9

Yup, just the opposite of us, the grommets get old and hard, lucky them huh? I too used RTV to hold in my PCV on my old setup.

 

BlownFiveLiter

have car, will race....wait, it doesn't run

15 Year Member

Nov 29, 1999

3,133

18

108

Chicagoland

Jul 3, 2007

#10

• Jul 3, 2007

• #10

gcomfx.com said:

Yup, just the opposite of us, the grommets get old and hard, lucky them huh?

Click to expand...

 

urban96

bubb rubb says:"woo woooooo"

Founding Member

Sep 24, 2002

3,464

1

69

Syracuse, NY

Jul 3, 2007

#11

• Jul 3, 2007

• #11

gcomfx.com said:

Yup, just the opposite of us, the grommets get old and hard, lucky them huh? I too used RTV to hold in my PCV on my old setup.

Click to expand...

hahaha

side note, i went with a parts store PCV and RTV'd that sucker in the groument

 

HISSIN50

"How long does it take to get help in here?

15 Year Member

Nov 29, 1999

31,179

34

129

Jul 3, 2007

#12

• Jul 3, 2007

• #12

gcomfx.com said:

Yup, just the opposite of us, the grommets get old and hard, lucky them huh?

Click to expand...

They also have constant vacuum (suction) on them though.