• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

PDR?

  • Thread starter Thread starter shlby123
  • Start date Start date Jun 21, 2006
  • 1
  • 2
Next
1 of 2 Next Last
S

shlby123

Founding Member
Apr 19, 2002
579
0
0
Dallas
Jun 21, 2006
#1
  • Jun 21, 2006
  • #1
How exactly does it work?
 

afast93stang

Founding Member
Jan 6, 2002
1,407
4
39
North Texas
Jun 21, 2006
#2
  • Jun 21, 2006
  • #2
What is it?
 
S

shlby123

Founding Member
Apr 19, 2002
579
0
0
Dallas
Jun 21, 2006
#3
  • Jun 21, 2006
  • #3
Paintless Dent Repair
 

afast93stang

Founding Member
Jan 6, 2002
1,407
4
39
North Texas
Jun 23, 2006
#4
  • Jun 23, 2006
  • #4
From what I understand, they usually just tap the dent out from behind. For example, a door that has a dent, they can take off the panel and tap it out form the inside of the door.
 

poneypower89

Now everyone in the world will know I wanna bang t
Dec 6, 2004
0
3
28
Indianapolis, Indiana
Jun 23, 2006
#5
  • Jun 23, 2006
  • #5
depends how large the dent is... most of the time they wont be taking a panel off...


usually, its a pluger type deal.. its hard to explain.. ill try and find some pics of the tool.



center part sticks to the inside of the dent and then to the tool... the ends of the tool are then screwed to add length and eventually press against the car putting pressure on the center of the dent and pulling it out. this only works on small dents though.
 

Strype

Cuthbert catcher
Founding Member
May 11, 1999
61
34
104
Huntsvegas, AL
Jun 23, 2006
#6
  • Jun 23, 2006
  • #6
I had it done correctly. See below...

If done:

Correctly- they drill very small hole, massage from behind, and leaves no crease.

Incorrectly-

poneypower89 said:
Click to expand...

And dents reappear in a couple of months
 

poneypower89

Now everyone in the world will know I wanna bang t
Dec 6, 2004
0
3
28
Indianapolis, Indiana
Jun 23, 2006
#7
  • Jun 23, 2006
  • #7
Ok.. im idiot
 

Strype

Cuthbert catcher
Founding Member
May 11, 1999
61
34
104
Huntsvegas, AL
Jun 23, 2006
#8
  • Jun 23, 2006
  • #8
poneypower89 said:
Ok.. im idiot
Click to expand...


That's not what I meant

Most places do it incorrectly. My insurance company is the ONLY one who won't pay to have it done that way (handle and glue)...

You're correct- that's how most places do it, or do it yourself'rs do it
 

poneypower89

Now everyone in the world will know I wanna bang t
Dec 6, 2004
0
3
28
Indianapolis, Indiana
Jun 23, 2006
#9
  • Jun 23, 2006
  • #9


I've had it done before on my old firebird. It worked just fine. But I sold the thing 3 months later (partly the reason for fixing the dents) I had no idea they had a chance of coming back, I would hate to be that new owner going... WTF? How did my car get dents just sitting in the garage???
 
T

Teeto's5.0

New Member
Nov 7, 2005
44
0
0
Janesville, WI
Jun 23, 2006
#10
  • Jun 23, 2006
  • #10
PDR is done by a large amount of push rods that are very flexable. You go in behind the ding and slowly bend it and massage it back to form. The dent returning is news to me and I find it very hard to believe knowing the way metal works. If you work the dent out its not gonna come back just sitting around. Heat wouldnt even make it return unless you stretch the metal so far it becomes oil canned and then the dent would not be fixed anyway.
 

Strype

Cuthbert catcher
Founding Member
May 11, 1999
61
34
104
Huntsvegas, AL
Jun 23, 2006
#11
  • Jun 23, 2006
  • #11
Teeto's5.0 said:
PDR is done by a large amount of push rods that are very flexable. You go in behind the ding and slowly bend it and massage it back to form. The dent returning is news to me and I find it very hard to believe knowing the way metal works. If you work the dent out its not gonna come back just sitting around. Heat wouldnt even make it return unless you stretch the metal so far it becomes oil canned and then the dent would not be fixed anyway.
Click to expand...


did you read a couple of posts up???
 

Hink

Member
May 31, 2006
67
0
6
Jun 25, 2006
#12
  • Jun 25, 2006
  • #12
Dent repairs, like hailstorm damages?

Heard about some guys doing dent repairs with liquid nitrogen and or dry ice, musta been about 10 years ago when last heard of it.
 

fidstang

New Member
Jul 19, 2005
307
0
0
South Lansing
Jun 26, 2006
#13
  • Jun 26, 2006
  • #13
Eastwood catalog has a unit that actually uses a small weld to pop the dent out. You just sand it down and refinish. I wouldn't call it paintless but you don't have to drill and trust the good ole bondo.
 
S

shlby123

Founding Member
Apr 19, 2002
579
0
0
Dallas
Jun 27, 2006
#14
  • Jun 27, 2006
  • #14
Is the kit with the crossbars suction cups and glue worth $50 bucks? I just have some real no-brainer little hail spots to remove and I didnt know if anybody else had used it before or if it was one of those little scam kits?
 

Busted07

I need my gorilla to be about an inch longer.
Nov 15, 2005
0
3
0
Jun 27, 2006
#15
  • Jun 27, 2006
  • #15
shlby123 said:
Is the kit with the crossbars suction cups and glue worth $50 bucks? I just have some real no-brainer little hail spots to remove and I didnt know if anybody else had used it before or if it was one of those little scam kits?
Click to expand...


if you have a store around you that you can get dry ice from, that is usually enough for small hail dents... if you havent used it before, use some thick gloves and a pair of tongs... dont let it touch the paint.. just get it close... it shrinks the metal, thus popping the dent out.
 
T

Teeto's5.0

New Member
Nov 7, 2005
44
0
0
Janesville, WI
Jun 27, 2006
#16
  • Jun 27, 2006
  • #16
HoodStrype said:
did you read a couple of posts up???
Click to expand...


What are you talking about?
 
S

shlby123

Founding Member
Apr 19, 2002
579
0
0
Dallas
Jun 27, 2006
#17
  • Jun 27, 2006
  • #17
kickass. where can somebody get dry ice?
 

Busted07

I need my gorilla to be about an inch longer.
Nov 15, 2005
0
3
0
Jun 27, 2006
#18
  • Jun 27, 2006
  • #18
shlby123 said:
kickass. where can somebody get dry ice?
Click to expand...


my local grocery store had it... thats where i got mine from... my girlfriends accord had a little ding in it from where i whacked a golf ball into it (dont ask) i brought it to the dealership here, and had the PDR guy look at it.. he said he couldnt use the PDR method because it is behind a brace in the door.. he told me about using the dry ice, and that was about 8 months ago, and the dent hasnt come back or anything.
 
S

shlby123

Founding Member
Apr 19, 2002
579
0
0
Dallas
Jun 28, 2006
#19
  • Jun 28, 2006
  • #19
ok, I tried using the dry ice, but unless Im just inept with how it's supposed to work, the dry ice really didnt do anything at all?
 

Busted07

I need my gorilla to be about an inch longer.
Nov 15, 2005
0
3
0
Jun 28, 2006
#20
  • Jun 28, 2006
  • #20
shlby123 said:
ok, I tried using the dry ice, but unless Im just inept with how it's supposed to work, the dry ice really didnt do anything at all?
Click to expand...


i looked it up and this is the method i used. I didnt have to let it touch the metal though.. but on here it says it might be required in some applications...


Dry Ice will condense metal and thereby shrink small dents on your car. Place the Dry Ice on the inside of the dent if possible. Use heavy gloves and press flat sheet against dent. If it is not possible to get on the inside concave part of the dent, then using heavy gloves hold the Dry Ice so a corner can fit into the bottom lowest part of the cratered dent. Hold the Dry Ice until the metal is frosted at least 2 inches beyond the dent. Let the metal warm up (in the sun is the best) and repeat the procedure. Sometimes the dent will pop out perfectly. More often it will not be possible to get a flat smooth finish, but the dent will be reduced noticeably. Creased metal will still show the crease line but the dent will be far less pronounced. I have not seen any paint damage, but I'm sure if the paint is not strongly adhered, it could peel away.


 
  • 1
  • 2
Next
1 of 2 Next Last
You must log in or register to reply here.

Similar threads

B
TMI Seat Foam for 89 (Need Info)
  • badazz81z28
  • Sep 10, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
0
Views
122
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 10, 2026
badazz81z28
B
S
Resolved 83 alternator wiring harness
  • sparten5000
  • Aug 2, 2026
  • Fox 5.0 Mustang Tech
Replies
2
Views
192
Fox 5.0 Mustang Tech Aug 23, 2026
limp
J
Interior and Upholstery NEED HELP FINDING SHIFTER PLATE
  • Jschallitz
  • Nov 12, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
2
Views
87
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Nov 13, 2026
rednotch
3
wheel fitment?
  • 387lx
  • Nov 14, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
0
Views
76
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Nov 14, 2026
387lx
3
C
Fox Need help identifying brake setup
  • Cypher02xd
  • Apr 25, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
2
Views
213
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 27, 2026
Mustang5L5
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?