PHOTOSHOP Help Please.

MysteryMachine · Apr 4, 2005

Kinda makes the front end look like a fox to me. Its nice but might be a little too much with the hood

Caldwell · Apr 4, 2005

This is JR's car without the hood.
I like it more too

and this is what my car is going to look like when i finish

Killercanary · Apr 4, 2005

Caldwell said:
How low are you lowering the beast paul?

Well I have 175lb 14" springs up front with coil overs, and I'm planning on putting on a pair of bullitt springs in the back. BUT, with the way my driveway goes into my garage my xenon side skirts hit now at stock ride height. I will have to get rid of the side skirts first, then the front and rear pieces. I'm hoping I can have enough money saved to swing them by carlisle so I won't have to pay shipping on the parts. I don't mind my body kit, but for my area I need something that isn't as low in the front and sides... and I want to get rid of the xenon "bubble-butt" I have too while I'm at it.

Do you think you could photoshop the stalker piece onto my car? I'd really appreciate it. I have a TON of pictures here...
http://www.angelfire.com/pa2/killercanary/pics.html

Caldwell · Apr 4, 2005

MysteryMachine said:
dude i should get you to PS a cobra bumper on mine lol always wondered how that would look

I'll definitely see what i can do man.

Killercanary said:
Well I have 175lb 14" springs up front with coil overs, and I'm planning on putting on a pair of bullitt springs in the back. BUT, with the way my driveway goes into my garage my xenon side skirts hit now at stock ride height. I will have to get rid of the side skirts first, then the front and rear pieces. I'm hoping I can have enough money saved to swing them by carlisle so I won't have to pay shipping on the parts. I don't mind my body kit, but for my area I need something that isn't as low in the front and sides... and I want to get rid of the xenon "bubble-butt" I have too while I'm at it.

Do you think you could photoshop the stalker piece onto my car? I'd really appreciate it. I have a TON of pictures here...
http://www.angelfire.com/pa2/killercanary/pics.html

I cant get over how low your car is with that kit!

that is insane. you've got to be less than an inch off the ground. Even at stock height, your wheels look huge too. I'm lookin now to see if I can get a stalker bumper on your car. It's going to be a journey I can already tell
you could quite possibly own the first 94-98 yellow mustang with a stalker kit.
I imagine you want the side skirts removed too?

Killercanary · Apr 4, 2005

Caldwell said:
I'll definitely see what i can do man.

I cant get over how low your car is with that kit!

that is insane. you've got to be less than an inch off the ground. Even at stock height, your wheels look huge too. I'm lookin now to see if I can get a stalker bumper on your car. It's going to be a journey I can already tell
you could quite possibly own the first 94-98 yellow mustang with a stalker kit.
I imagine you want the side skirts removed too?

Yeah, its really low. The front fascia sits about 2" below the stock one (its an add on) and the side skirts are AT LEAST 2-3" below the pinch weld on the FRAME!!! That is probably the biggest reason I have not lowered the car yet. In some of those picture the car is lowered though as I put yeahloh95's front eibachs on my car for a short time last summer and it was PURE HELL driving the car around as it scraped EVERYWHERE. I had to go buy wood at lowes just to drive my car up onto to get it into the garage! It was a major PITA. If you could do the side skirts I'd appreciate it, you could even make them stock as I might end up getting the front and rear first and run them with the stock sides due to the $$$ of the kit. I have only seen one other yellow car with this front end, he is on here from time to time with racing hart wheels and a pearlesent (sp) yellow paint. I think he is from Las Vegasor somewhere out west. The stalker is definitely higher in the front (its on a sort of slope) than my current one and the side skirts are no lower than the frame. My hope is that I can lose the wheel well gap and acutally gain some ground clearance with the body kit, or if nothing else it'll be no lower than it is now.

Caldwell · Apr 4, 2005

Killercanary said:
Yeah, its really low. The front fascia sits about 2" below the stock one (its an add on) and the side skirts are AT LEAST 2-3" below the pinch weld on the FRAME!!! That is probably the biggest reason I have not lowered the car yet. In some of those picture the car is lowered though as I put yeahloh95's front eibachs on my car for a short time last summer and it was PURE HELL driving the car around as it scraped EVERYWHERE. I had to go buy wood at lowes just to drive my car up onto to get it into the garage! It was a major PITA. If you could do the side skirts I'd appreciate it, you could even make them stock as I might end up getting the front and rear first and run them with the stock sides due to the $$$ of the kit. I have only seen one other yellow car with this front end, he is on here from time to time with racing hart wheels and a pearlesent (sp) yellow paint. I think he is from Las Vegasor somewhere out west. The stalker is definitely higher in the front (its on a sort of slope) than my current one and the side skirts are no lower than the frame. My hope is that I can lose the wheel well gap and acutally gain some ground clearance with the body kit, or if nothing else it'll be no lower than it is now.

Ouch, see i would freak out if i was scraping everywhere. I will on bad angled driveways or if the road severely dips in the middle, but other than that, it's not too bad. Granted I'm still running a stock body too. I think you'll be happy to ditch the xenon, it's not bad, but it's a bit bulky, especially the sides...
I'm going to see if i can find that guy you were talking about, the side skirts are easy to doctor, but usually I like angle shots of the same colour bumper as the car. Thankfully you have about a million or so pics to choose from. Not that I blame you, i wish i had more pics of my car. Worst case scenario I'll have her fixed up by tomorrow. When I did jr's car, I just used a black stalker, and blended colours. Yellow is so "in your face" that it's difficult to colour blend.
I'll get her done though, no worries.

nmcgrawj · Apr 4, 2005

would this help?

94TURBO5 O · Apr 4, 2005

Caldwell said:
This is JR's car without the hood.
I like it more too

THANKS CALDWELL!!! It looks so damn beautiful that my wife saw it and said "Do it" so I'm looking around for a Stalker front now. I guess the accident I had was a blessing in disguise. I'm just happy there will be no down time b/c I can installed the painted bumper myself. It actually looks better with my stock hood than the R.

For real..Thanks Again man!

pleasehelp · Apr 4, 2005

What are you going to do with the stock bumper, JR??

94TURBO5 O · Apr 4, 2005

I'm going to keep it as a spare to swap on and off.

pleasehelp · Apr 4, 2005

Ah, I should've figured that.

super302 · Apr 5, 2005

how much is it to paint the bumper mystic??

94TURBO5 O · Apr 5, 2005

I'm going to claim it tomorrow to GEICO and I'll pay just $250. The paint is $50 an oz, and they get it in 1qt cans. The best part is that they will let me keep the rest they don't use up.
I'll let you know after I get the full estimate.

pleasehelp · Apr 5, 2005

One million dollars!!!!!!

Caldwell · Apr 5, 2005

nmcgrawj said:
would this help?

That would help actually!
thanks man

Here you go Paul

94SC50 said:
THANKS CALDWELL!!! It looks so damn beautiful that my wife saw it and said "Do it" so I'm looking around for a Stalker front now. I guess the accident I had was a blessing in disguise. I'm just happy there will be no down time b/c I can installed the painted bumper myself. It actually looks better with my stock hood than the R.

For real..Thanks Again man!

Not a problem, glad to help. And I agree, it does look better with the stock hood, a bit cleaner looking. Now you got me wanting one
Soon... very soon.

94GTLaserRC · Apr 5, 2005

JR....Can you sell me your hood?

BTW....Those front bumpers are so prone to that cracking when they get jarred. I guess whoever did yours also did NOT use the flex agent in the paint. If they get bumped, they should just crack at the site, but the paint should NOT continue to peel down.

GL with your choice although I like what you got now.
RC

94TURBO5 O · Apr 5, 2005

Maybe I'm a little to particular about my car b/c this is just killing me.

The spider webs are all the way around the left side but are so damn hard to get any pics from the reflection.

To the left of the pic you can see 4 spots flaking.

94TURBO5 O · Apr 5, 2005

Paul

That looks awesome man!

Another great job CALDWELL!

]

Killercanary · Apr 5, 2005

Thanks Caldwell!!!

Caldwell · Apr 5, 2005

Thanks guys, I hope that was kind of what you were looking for.

JR: How did that happen man!?
you aren't *too* particular with your car, that would drive me up a wall. I have my top starting to rip and I'm going crazy over here.

PHOTOSHOP Help Please.

Active Member

New Member

The car that set the bar.

New Member

The car that set the bar.

New Member

Advanced Member

New Member

New Member

New Member

New Member

I'd do anything for free Bapples

New Member

New Member

New Member

Squint as you approach, lest you be blinded by my

New Member

New Member

The car that set the bar.

New Member

Similar threads

Privacy & Transparency

Privacy & Transparency