PI Engine Swap

Guys,

I have a complete PI engine from t/b to pil pan and everything in between including front cover and all accessories. Coil on plug design, etc. I have a 2004 mustang gt computer and a new 4r70w bolted up. I want to put all of this in my 1997 Mustang Gt. Can I use the '04 Computer and the coil on plug design? Shouldn't this swap with in?

Greatly appreciate the info.

Alright, Sounds like I need to swap my coil packs and get rid of the coil on plug, then use my stock computer. I have new wires so I can use those. IS there a place to mount the stock coils or can I fab something up so I dont have to take the timing cover off. Id Love to keep this thing intact as much as possible. Valve covers should be able to stay on I presume.

here is what I got Summit FMC46L - Summit Ford 4.6L Modular Engine with 4R70W Automatic Transmission Combos – SummitRacing.com

Each engine is equipped with these Ford components:

* Brand new 4R70W automatic transmission
* Performance Improvement 2V heads
* ECU
* Engine wiring harness
* Custom performance air intake
* MAF sensor
* Starter
* Shifter and cable assemblies
* Power steering pump
* A/C compressor