pi ?
- Thread starter impu1se
- Start date
different alt bracket, temp sensors might have a t-fitting. oh! oh! oh! it would pull alot harder top end than nonpi
take a picture of your engine bay and we will tell you if you have a pi intake atleast by looking.
Non PI intakes have taller and wider runners. ther nonpis were more flat and square. Also a PI intake goes all the way down to the valley of the block, where as a non pi is shallow and leaves a gap.
also, your car will pull alot harder than your friends with non pi.
also, your car will pull alot harder than your friends with non pi.
Nope, not really. The runners are easy to tell from the top. The Non-PI's are smooth all the way around, where the PI's have a distinct hard edge on them where the ports square off, to meet the head. If someone could find a couple of pics from the top of each, you'd see.
just the port shape and longer runners
I'll do the leg work then, damnit!!! 
Non PI
View attachment 507095
PI
View attachment 507097
Notice how the runners taper and square on the PI's right near the injector bosses.
Non PI
View attachment 507095
PI
View attachment 507097
Notice how the runners taper and square on the PI's right near the injector bosses.
Gearbanger 101 said:
yeah..
call sometimes call sometimes call sometimes call sometimes call sometimes call sometimes call sometimes call sometimes call sometimes call sometimes call sometimes call sometimes call sometimes call sometimes call sometimes call sometimes call sometimes call sometimes call sometimes call sometimes call sometimes call sometimes call
I'm browsing my cam pics, i have over 3000 of them 
but really, my intake wasnt square like that one in your pic
but really, my intake wasnt square like that one in your pic
View attachment 507091
here was the one from the kit (parkway 2004 swap)
This is one of the install How-To's
lol i'm lost now.
here was the one from the kit (parkway 2004 swap)
This is one of the install How-To's
lol i'm lost now.
Similar threads
