pillar pod

[mustangsally93]

Well I got a two 2 1/16 pillar pod now im looking to get a three pillar pod. But when i put the first one on, I had to take every thing off on the dash to put it on. Is it that hard to replace it with a three pod. I got a boost, afr,nos press,oil, what else can i get other then fuel press. thanks guys

 

[HISSIN50]

Do you have any mechanical gauges? For something like mech temp, you would have to remove the capillary tube to get the gauge in and out of the pod.

I didnt have to remove any parts of my dash when doing a dual pod in the fox or a triple in the 94 - we must use different methods.

Good luck.

 

[mustangsally93]

sorry bad pic. all the gauges all ele other then the oil press. but it kick my ass when i put it in. the whole dash almost came out.



but what else should I get all of my pay checks go in the car

 

[HISSIN50]

I am sure someone else can help - I have no idea why anything other than the pillar had to come out (I didnt even remove the pillar when I did the two gauge pod).

Your gauges lend themselves well to the swap - the only mech gauge is OP and you can disconnect the line at the gauge. So that part should be easy.

Good luck.

 

[mustangsally93]

no it not that i can't hook it up. I can't get the pillar in and out, not the gauges. I was seeing if anyone else had the thing happen to them.