pillar pod

mustangsally93

New Member

Sep 26, 2005

281

0

0

Omaha,NE

Jan 27, 2006

#1

• Jan 27, 2006

• #1

Well I got a two 2 1/16 pillar pod now im looking to get a three pillar pod. But when i put the first one on, I had to take every thing off on the dash to put it on. Is it that hard to replace it with a three pod. I got a boost, afr,nos press,oil, what else can i get other then fuel press. thanks guys

 

HISSIN50

"How long does it take to get help in here?

15 Year Member

Nov 29, 1999

31,179

33

129

Jan 27, 2006

#2

• Jan 27, 2006

• #2

Do you have any mechanical gauges? For something like mech temp, you would have to remove the capillary tube to get the gauge in and out of the pod.

I didnt have to remove any parts of my dash when doing a dual pod in the fox or a triple in the 94 - we must use different methods.

Good luck.

 

mustangsally93

New Member

Sep 26, 2005

281

0

0

Omaha,NE

Jan 27, 2006

#3

• Jan 27, 2006

• #3

sorry bad pic. all the gauges all ele other then the oil press. but it kick my ass when i put it in. the whole dash almost came out.

but what else should I get all of my pay checks go in the car

 

HISSIN50

"How long does it take to get help in here?

15 Year Member

Nov 29, 1999

31,179

33

129

Jan 27, 2006

#4

• Jan 27, 2006

• #4

I am sure someone else can help - I have no idea why anything other than the pillar had to come out (I didnt even remove the pillar when I did the two gauge pod).

Your gauges lend themselves well to the swap - the only mech gauge is OP and you can disconnect the line at the gauge. So that part should be easy.

Good luck.

 

mustangsally93

New Member

Sep 26, 2005

281

0

0

Omaha,NE

Jan 27, 2006

#5

• Jan 27, 2006

• #5

no it not that i can't hook it up. I can't get the pillar in and out, not the gauges. I was seeing if anyone else had the thing happen to them.