• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Pinion Woes

  • Thread starter Thread starter mustangcobra93
  • Start date Start date Mar 17, 2004

mustangcobra93

Founding Member
Jan 22, 2002
928
0
16
Mar 17, 2004
#1
  • Mar 17, 2004
  • #1
I'm in the process of changing gears from the stock 3.08 to 3.55. I've got the differential out and am currently trying to get the pinion off. I took the pinion nut off and the flange. The instructions I have say that the pinion should fall loose with those removed. However, my pinion didn't move at all. I've beat the hell out of it trying to get it out and its not moving. What am I doing wrong?
 
S

ss93cobra

Founding Member
Apr 10, 2002
1,422
1
0
Wilmington NC
Mar 17, 2004
#2
  • Mar 17, 2004
  • #2
WOW.. Alright, you removed the center diff. assy which should leave you staring into the back of the pig at nothing but the pinion gear. No ring gear, side gears, spider gears, center pin and shaft, bearing caps removed, etc. At this point there is NOTHING keeping it in other than the nut on the front side of the rear end, the pinion nut. Nothing at all. I can't believe it got "stuck" to the bearing or race or anything like that. Can you rotate it?
 
M

matm347

Founding Member
Aug 29, 2000
2,056
0
0
Mar 17, 2004
#3
  • Mar 17, 2004
  • #3
Yes, it should come out with no problems, not sure why you'd have to beat on it!
 

mustangcobra93

Founding Member
Jan 22, 2002
928
0
16
Mar 17, 2004
#4
  • Mar 17, 2004
  • #4
ss93cobra said:
WOW.. Alright, you removed the center diff. assy which should leave you staring into the back of the pig at nothing but the pinion gear. No ring gear, side gears, spider gears, center pin and shaft, bearing caps removed, etc. At this point there is NOTHING keeping it in other than the nut on the front side of the rear end, the pinion nut. Nothing at all. I can't believe it got "stuck" to the bearing or race or anything like that. Can you rotate it?
Click to expand...


Yep, the diff is out and the pinion nut is off. It rotates fine, just won't come out.
 

Ranchero5.0

The Voice of Reason
Jan 1, 1999
5,306
0
76
Hagerstown MD
Mar 17, 2004
#5
  • Mar 17, 2004
  • #5
Bigger hammer and hit it harder. Should have fell out, but may have siezed to the bearing. I had one tight, but the rest always fell out.

Jamie
 

fordman54935

Member
Jan 10, 2003
301
0
16
Wisconsin
Mar 17, 2004
#6
  • Mar 17, 2004
  • #6
Make sure the crush collar is off. This might be just enough to keep the pinion from coming out.
 
You must log in or register to reply here.

Similar threads

J
2004 Mustang 3.8L V6 vibrations above 65 MPH and differential leaks
  • joeybuddy96
  • Mar 16, 2026
  • SN95 V6 Mustang Tech
Replies
16
Views
606
SN95 V6 Mustang Tech Jul 14, 2026
joeybuddy96
J
S
Drivetrain 8.8 Pinion and 302 rear main seal leaks after replacing. 93 5.0 with t-5
  • Steigy4827
  • Jun 23, 2025
  • Fox 5.0 Mustang Tech
Replies
10
Views
682
Fox 5.0 Mustang Tech Apr 1, 2026
Steigy4827
S
3
Eight inches is enough for me...
  • 351MooseStang
  • Nov 27, 2025
  • 1974 - 1978 Mustang II Talk & Tech
Replies
5
Views
589
1974 - 1978 Mustang II Talk & Tech Mar 2, 2026
Bullitt347
Drivetrain 83’ Glx convertible C5 Trans help!
  • JacksonJared2113
  • Dec 25, 2025
  • Fox 5.0 Mustang Tech
Replies
2
Views
401
Fox 5.0 Mustang Tech Dec 26, 2025
JacksonJared2113
R
Flex plate and starter issues
  • RJH46
  • Jun 24, 2025
  • Other Auto Tech
Replies
19
Views
1K
Other Auto Tech Aug 19, 2025
nickyb
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?