• Community Forums
  • Regional Forums and Event Information

PIR late night drags

  • Thread starter Thread starter just_a_guy84
  • Start date Start date Aug 8, 2009
J

just_a_guy84

Member
Jun 27, 2003
32
0
6
Aug 8, 2009
#1
  • Aug 8, 2009
  • #1
Anybody on here attend the late night drags at Portland International Raceway? I've been thinking about dragging my 1998 Cobra out there to see if I can't embarrass myself. It would be my first time out and I would like to meet someone out there to maybe give me some pointers.

 

cobradvm

New Member
Sep 2, 2003
245
1
0
Woodinville, WA
Aug 8, 2009
#2
  • Aug 8, 2009
  • #2
Don't worry about it - just show up and watch what's going on and have some fun. Main thing is make sure your car is empty of any junk that's rolling around in it. Make sure the battery is secure, and the + post is covered. Make sure you have a functioning coolant recovery tank. When it's your turn to run, drive around the water box and forget about a burnout. Maybe do a quick hop to clean off the wheels. Roll up slowly to the lights - 1st pair at the top of the tree is the prestage lights, then the second pair is the staged lights. Now your ready to run. If you roll too far the prestage lights may go out, and that's ok. Then the amber lights will count down. As soon as you see the third amber light, let 'er rip. I would suggest starting at idle and rolling hard into the throttle to try and avoid wheel spin.
 

Steel Steeds

New Member
Aug 31, 2005
234
1
0
Portland, OR
Aug 10, 2009
#3
  • Aug 10, 2009
  • #3
You'll love it. I thought for a second you might have my old car, but your's still has the factory wheels and ride height. My Atlantic Blue Cobra was lowered 2" and had chrome Bullitt wheels on it when I traded it in 2 years ago. You might need a helmet, your car will get you into the 13's pretty easily, and anything faster than 14.0 they require a helmet. You can check the regs on the PIR website.
Have fun!
 
J

just_a_guy84

Member
Jun 27, 2003
32
0
6
Aug 10, 2009
#4
  • Aug 10, 2009
  • #4
Steel Steeds said:
You'll love it. I thought for a second you might have my old car, but your's still has the factory wheels and ride height. My Atlantic Blue Cobra was lowered 2" and had chrome Bullitt wheels on it when I traded it in 2 years ago. You might need a helmet, your car will get you into the 13's pretty easily, and anything faster than 14.0 they require a helmet. You can check the regs on the PIR website.
Have fun!
Click to expand...

yeah, I've checked out their site, I thought I'd pack my helmet just in case i did crack into the 13's. I'd be pretty happy with some low 14's, being my first time out. Anyhow, I think I'll be heading out there this Saturday. If anybody from around here is there feel free to come say hello.
 

Steel Steeds

New Member
Aug 31, 2005
234
1
0
Portland, OR
Aug 11, 2009
#5
  • Aug 11, 2009
  • #5
I wish I could come by and admire your car. Still miss mine... But, I'll be out of town. Hopefully you'll continue to attend and hone your times. I'm way overdue to find out what my GT 500 will do on the track, and plan to start spending more time there in a few weeks.
 

SMOKEDYA

20+ Year Stangneter
Jul 13, 2003
3,637
8
79
Tucson AZ
Aug 12, 2009
#6
  • Aug 12, 2009
  • #6
i might be headed down saturday night? you should go down to woodburn this sunday for the all ford day! theres 4 of us going to that.where are you located? peace










john
 

SMOKEDYA

20+ Year Stangneter
Jul 13, 2003
3,637
8
79
Tucson AZ
Aug 12, 2009
#7
  • Aug 12, 2009
  • #7
heres a link to woodburn with the info and a link for a discount coupon http://glasshousefarms.com/Woodburn/coupon.html
woodburn
 
J

just_a_guy84

Member
Jun 27, 2003
32
0
6
Aug 12, 2009
#8
  • Aug 12, 2009
  • #8
SMOKEDYA said:
i might be headed down saturday night? you should go down to woodburn this sunday for the all ford day! theres 4 of us going to that.where are you located? peace










john
Click to expand...

Yeah, Saturday. I forgot that all ford day was this weekend too; I might just have to do that. I'm down in Gresham, so only about an hour away.
 
J

just_a_guy84

Member
Jun 27, 2003
32
0
6
Aug 12, 2009
#9
  • Aug 12, 2009
  • #9
Steel Steeds said:
I wish I could come by and admire your car. Still miss mine... But, I'll be out of town. Hopefully you'll continue to attend and hone your times. I'm way overdue to find out what my GT 500 will do on the track, and plan to start spending more time there in a few weeks.
Click to expand...

I'd like to try and get out there more regularly, I'd like to see what that GT 500 can do too.
 

SMOKEDYA

20+ Year Stangneter
Jul 13, 2003
3,637
8
79
Tucson AZ
Aug 14, 2009
#10
  • Aug 14, 2009
  • #10
Steel Steeds said:
I wish I could come by and admire your car. Still miss mine... But, I'll be out of town. Hopefully you'll continue to attend and hone your times. I'm way overdue to find out what my GT 500 will do on the track, and plan to start spending more time there in a few weeks.
Click to expand...

perfect match up for the other one down there! he runs low 11's! peace



john
 
J

just_a_guy84

Member
Jun 27, 2003
32
0
6
Aug 16, 2009
#11
  • Aug 16, 2009
  • #11
Well, I went down there last night and ran a best of 14.117 @99.5 with a 2.234 60'. It was a blast. If I can figure out the launch I've got 13's. But, all in all I think I did alright for my first time out.
 

SMOKEDYA

20+ Year Stangneter
Jul 13, 2003
3,637
8
79
Tucson AZ
Aug 18, 2009
#12
  • Aug 18, 2009
  • #12
didnt make it last wekkend had to tend to my daughter for the night. my buddy went said it was a sweet turn out tho! maybe next weekend tho.peace






john
 

Steel Steeds

New Member
Aug 31, 2005
234
1
0
Portland, OR
Aug 18, 2009
#13
  • Aug 18, 2009
  • #13
I'm not going to be able to get to the track until sometime after Labor Day. Between the usual summer plans, visiting relatives, and my anniversary, my weekends are booked solid through then. Hopefully the week or two after that, I'll be there in my Shelby.
 

CobraII4me

New Member
Dec 21, 2008
12
2
1
Idaho Falls, ID USA
Aug 26, 2009
#14
  • Aug 26, 2009
  • #14
Anyone showing cars in Idaho later in August/September?

Lance, are you planning anymore shows this summer or fall?

I am in Idaho Falls, and would love to get over and bring my car to a show. Planning anything over this way?
 

Steel Steeds

New Member
Aug 31, 2005
234
1
0
Portland, OR
Aug 27, 2009
#15
  • Aug 27, 2009
  • #15
Hey Allan! Not used to seeing you over here, just daily over on .Net!
I don't currently have anything planned in the way of shows/events. If something pops up on a weekend that I'm free, I'll take the Shelby. Mostly I'm just tapping my foot waiting for my King to get out of the body shop. You've been there, you know how it is. Right now I'm on the back burner, the guy got a few small jobs in that he's working on before he gets back to mine.
Next year, when the King is finished and show-ready, I plan to hit a lot more shows. I had planned to go up to Car d'Alene in June, but they changed their requirements. When we went two years ago, it was open to all cars up to 1979. They scaled it back to 1972 effective this year. I guess they had too many entrants!
Hopefully we'll manage to be in a show together in the not-too-distant future. We've only been talking about it for 4-5 years now...
 
You must log in or register to reply here.

Similar threads

J
Help Figuring Motor Choice(Possible future turbo)?
  • jaygee15
  • Dec 14, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
13
Views
612
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jan 3, 2026
Jarhead67
J
B
'03 GT Fuel Pump/Pressure/Delivery Issue
  • Brodach
  • Oct 21, 2025
  • SN95 4.6L Mustang Tech
Replies
8
Views
878
SN95 4.6L Mustang Tech Oct 31, 2025
gkomo
S
Fox '87 GT can't get to stay running
  • spilly
  • Mar 29, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
27
Views
762
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 20, 2026
spilly
S
S
  • Locked
Drivetrain Adjustable clutch cable questions
  • Scott_S
  • Oct 31, 2025
  • Fox 5.0 Mustang Tech
Replies
6
Views
410
Fox 5.0 Mustang Tech Oct 31, 2025
Noobz347
SN95 Desktop 363 Engine Combination - Looking for input
  • WhiteCobra95
  • Sep 8, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
11
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 6, 2025
Habu135
Share:
Bluesky Email Share Link
  • Community Forums
  • Regional Forums and Event Information
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?