Alright, I know this has probably come up in the past and discussed to death but I'm just looking for some insight! Piston choice for a rebuild and need to be compatible with GT-40 heads!
306 Forged Pistons and rings
There are so many manufacturers that its down right confusing SBF, Probe, TFS, FPS flat top dome??? Where to start!
It seems you can get a good set for around $300 or you can spend $799 and there are also the rings to consider! Staying with a stock bottom end polished crank and stock forged tie rods which is the best piston for my application?
302 bored .030 306
GT-40 Aluminum heads
GT-40 Upper and Lower intake
b303 Cam
bbk throttle body
24# injectors
255 Fuel pump
MSD Ignition
306 Forged Pistons and rings
There are so many manufacturers that its down right confusing SBF, Probe, TFS, FPS flat top dome??? Where to start!
It seems you can get a good set for around $300 or you can spend $799 and there are also the rings to consider! Staying with a stock bottom end polished crank and stock forged tie rods which is the best piston for my application?
302 bored .030 306
GT-40 Aluminum heads
GT-40 Upper and Lower intake
b303 Cam
bbk throttle body
24# injectors
255 Fuel pump
MSD Ignition