• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

PLEASE help i have a serious problem!!!!!

  • Thread starter Thread starter mr_tinkertrain
  • Start date Start date May 31, 2004
M

mr_tinkertrain

Member
Dec 14, 2003
151
0
16
Hot Springs, AR
May 31, 2004
#1
  • May 31, 2004
  • #1
Ok, the past 2 nights my car has not started for me. It starts and i have driven it to work (15 min) but after i kill it, it will not start again. It smells terribly like gas so i am PRETTY sure its flooding out somehow. It runs good besides that though. There are several weird things that seem related to this problem though. For the past year it has made terrible popping noises at low rpm's mostly when its cold. I THINK that was from it running lean. Now since this problem has started it hasnt made any popping noises at all. Runs good actually. The only thing i have done to the car recently is taken the oxygen sensors out and cleaned them. Could this have anything to do with it? I've tried the eec test but it will not work for me. I cant use check engine light because bulb has been removed. But the test light i use for the eec test wont fluctuate. What i mean is that the light steadily stays on and will not flash as if its giving a code. So unless someone would give me a COMPLETE walkthrough of how to do it (incase i'm doing something wrong) then that is outta the question. BTW the websites showing how to do the test arent helping at all as i have both saved on my computer. What i really think is that my computer finally realized the car was running lean after i played around with the eec test and tried to fix it. I dont know how it couldnt have caught the problem instantly but maybe something is wrong with the computer. Could it be leaky injector? Fuel pressure regulator? The car is getting spark and turns over but it just wont start UNLESS it has set at least 4 hours. Please help me!!
 
9

92Frankenstein

New Member
Apr 25, 2004
223
0
0
Minnesota
May 31, 2004
#2
  • May 31, 2004
  • #2
Could be the computer, although I havent heard of that on a stang. I know luminas and all those other chevy wonders are notorious for it!
 
T

TheUser

Active Member
Jul 25, 2003
1,859
1
36
Springfield, MO
Jun 1, 2004
#3
  • Jun 1, 2004
  • #3
i'd say either fuel pressure regulator or leaking injector, both which you pointed out. I'm not sure how you can test for either, but maybe someone else does or has some other ideas...
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Jun 1, 2004
#4
  • Jun 1, 2004
  • #4
It would be very easy to misconnect the jumper for the ECC test. here's the sites that I recommend to help get you jumpered correctly:


Here's the link to dump the computer codes with only a jumper wire or paper clip and the check engine light, or test light or voltmeter. I’ve used it for years, and it works great.

See http://www.troublecodes.net/Ford/
OR
See http://www.dalidesign.com/hbook/eectest.html for more descriptive help
OR
See http://www.mustangworks.com/articles/electronics/eec-iv_codes.html

The middle link is very good with his description of the test proceedure & test connector.

If after checking your efforts to get codes and are still not sucessful, repost and we can start looking for wiring problems in the signal ground circuit for the computer.
 
You must log in or register to reply here.

Similar threads

Electrical Code 29 again
  • Creomod
  • Jul 31, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
355
Fox 5.0 Mustang Tech Aug 3, 2026
Creomod
M
Electrical 93 5.0 No Injector Pulse
  • machinermac
  • Jul 26, 2026
  • Fox 5.0 Mustang Tech
Replies
15
Views
454
Fox 5.0 Mustang Tech Aug 1, 2026
Willybill32
B
Electrical Why does my fox body keep frying eecs
  • brandyn200
  • Jun 20, 2026
  • Fox 5.0 Mustang Tech
Replies
8
Views
473
Fox 5.0 Mustang Tech Jun 25, 2026
AeroCoupe
N
Engine 86 GT no start/stall
  • nweber
  • Jul 28, 2026
  • Fox 5.0 Mustang Tech
Replies
6
Views
246
Fox 5.0 Mustang Tech Jul 29, 2026
AeroCoupe
Resolved 93 Mustang 5.0 - Cranks but does not start
  • dan50
  • Jul 18, 2026
  • Fox 5.0 Mustang Tech
Replies
6
Views
434
Fox 5.0 Mustang Tech Jul 18, 2026
dan50
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?