• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

please help with ac

  • Thread starter Thread starter black87gtbeauty
  • Start date Start date Jun 1, 2006
B

black87gtbeauty

Member
Apr 28, 2003
36
0
6
Jun 1, 2006
#1
  • Jun 1, 2006
  • #1
im trying to get my ac working, im not getting power to the switch on the compressor, when i jump the two terminals on the compressor it kicks right on and the air blows cold but it obviously wont cycle, is there any relays i should check, also i checked and there is power to the ac fuse, and there is also power to the switch on the reciever dryer, thanks for any help you can give
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Jun 1, 2006
#2
  • Jun 1, 2006
  • #2
black87gtbeauty said:
im trying to get my ac working, im not getting power to the switch on the compressor, when i jump the two terminals on the compressor it kicks right on and the air blows cold but it obviously wont cycle, is there any relays i should check, also i checked and there is power to the ac fuse, and there is also power to the switch on the receiver dryer, thanks for any help you can give
Click to expand...
OOOPS - I misread this one...
 
J

jzgt

New Member
Feb 5, 2004
26
0
0
Jun 1, 2006
#3
  • Jun 1, 2006
  • #3
Have any of you guys (or anyone out there) used any of the alternatives? I heard of one called Hot Shot some time ago and it was relatively cheap. I just did a little research and it is listed on the EPA site :
http://www.epa.gov/ozone/snap/refrigerants/lists/mvacs.html

I'm going to see if I can find more info about it. From what I remember, it was compatible with the R12.

Also, jrichker, is the fact that your A/C isn't as cold due to the less effective refrigerant (R12 vs. R134a) or the differences in the equipment, if any, from an R12 to R134a system (i.e. Pressure).

Thanks!

Edit: I just found a price and they are around $16/10 oz. can

- Jeff
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Jun 1, 2006
#4
  • Jun 1, 2006
  • #4
black87gtbeauty said:
when i jump the two terminals on the compressor it kicks right on and the air blows cold but it obviously wont cycle, is there any relays i should check, also i checked and there is power to the ac fuse, and there is also power to the switch on the reciever dryer, thanks for any help you can give
Click to expand...
Going backwards from the AC clutch would be the WOT relay (the most likely spot to have an electrical issue IMHO). Look for vulcanized wiring or a bad relay (heat really wipes both out). The relay and socket are on the pass fender adjacent the air inlet tube and the front of the strut tower.

You already checked the LPS, which would be the next step backwards from there.

Some manifold gauges to see pressures (if you have gauges) would be a nice thing to use.

Good luck.
 
B

black87gtbeauty

Member
Apr 28, 2003
36
0
6
Jun 1, 2006
#5
  • Jun 1, 2006
  • #5
thanks for your quick replies guys, the whole system has been converted to r 134a before i baught the car, it has the red and blue dust caps and the reciever dryer is brand new as well as the compressor, i hooked up the gauges and i got a reading of about 30 on the low side and about 250 on the high side, but due to the fact that the compressor is not cycling i dont think im getting correct readings, im gonna replace the relay on the pass inner fender, if thats not it what would be the next thing to try

thanks
 

9646gt

Member
Apr 7, 2005
595
3
18
Holloman AFB,NM
Jun 1, 2006
#6
  • Jun 1, 2006
  • #6
WOT wire seems like a good fix...if that wire is damaged the comp may think you are at wide open throttle and prevent the comp from cycling
 
You must log in or register to reply here.

Similar threads

P
I need definitive heater valve and AC expansion valve answers
  • PurAU
  • Sep 26, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
4
Views
252
1965 - 1973 Classic Mustangs -General/Talk- Oct 1, 2026
GypsyR
G
2
2010 GT AC issue
  • 2010torchredgt
  • Jun 28, 2026
  • 2010 - 2014 Specific Tech
Replies
1
Views
209
2010 - 2014 Specific Tech Jun 29, 2026
2010torchredgt
2
Electrical AC relay location on 86?
  • TIGGER
  • Aug 26, 2025
  • Fox 5.0 Mustang Tech
Replies
1
Views
268
Fox 5.0 Mustang Tech Aug 26, 2025
AeroCoupe
D
Loud noise(s) from Engine Bay
  • DuluthFoxbody
  • Oct 25, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
14
Views
390
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Nov 5, 2026
AeroCoupe
Electrical 89 fox AC help please
  • Fast89GWILL
  • Dec 5, 2024
  • Fox 5.0 Mustang Tech
Replies
5
Views
667
Fox 5.0 Mustang Tech Dec 18, 2024
Mindseye007
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?