• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Please help with Modifications!

  • Thread starter Thread starter savegoodautonfg
  • Start date Start date Feb 9, 2006
Prev
  • 1
  • 2
  • 3
Next
First Prev 2 of 3 Next Last

Mavrick

Founding Member
Aug 29, 2002
2,264
0
46
Collingwood, ON
Feb 12, 2006
#21
  • Feb 12, 2006
  • #21
savegoodautonfg said:
How are these
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=4612965541
Click to expand...

Check out Maximum Motorsports full length connectors...

http://www.maximummotorsports.com/sfc.asp

Or ebay full lengths (same seller as your above ebay auction)

http://cgi.ebay.ca/86-87-88-89-Must...ryZ42611QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
 
I

IntenseBlue

Member
Jul 10, 2005
946
0
16
Feb 12, 2006
#22
  • Feb 12, 2006
  • #22
A 70-76mm will be fine. Some like C&Ls, some like ProM, which went out of business. You can still find used ones on ebay, though. They're supposedly just under a differnt name. Pro Mass Air Systems I think. I don't know if they carry the same sizes as they used to. But like I said earlier, 70-76mm. I would get gears before anything. Also I forgot to mention subframe connectors. If you get gears, make these the next modification after.
 
S

savegoodautonfg

New Member
May 11, 2005
1,085
0
0
Feb 12, 2006
#23
  • Feb 12, 2006
  • #23
[
 

Mavrick

Founding Member
Aug 29, 2002
2,264
0
46
Collingwood, ON
Feb 12, 2006
#24
  • Feb 12, 2006
  • #24
One set are standard length, and the other (more expensive) set are full length frame connectors.

Standard length connectors will help, but the full length connectors will tie your chassis together better.
 
S

savegoodautonfg

New Member
May 11, 2005
1,085
0
0
Feb 12, 2006
#25
  • Feb 12, 2006
  • #25
Mavrick said:
Check out Maximum Motorsports full length connectors...

http://www.maximummotorsports.com/sfc.asp

Or ebay full lengths (same seller as your above ebay auction)

http://cgi.ebay.ca/86-87-88-89-Must...ryZ42611QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Click to expand...


Also mavrick, Do they get bolted on?
Also just curious, Why the full lengths over the standard one's?
 
S

savegoodautonfg

New Member
May 11, 2005
1,085
0
0
Feb 12, 2006
#26
  • Feb 12, 2006
  • #26
oh you already answered my question. thanks for all yoru help.. i really aprpeciate it
 
J

jmd2914

Founding Member
Sep 6, 2002
937
0
0
Napa, California
Feb 12, 2006
#27
  • Feb 12, 2006
  • #27
full length over standard because it ties more of your chassis together and i would weld them in instead of bolting, but thats just me, subframes are going to be my next mod also.
 
J

jmd2914

Founding Member
Sep 6, 2002
937
0
0
Napa, California
Feb 12, 2006
#28
  • Feb 12, 2006
  • #28
oops, didnt see the post above me
 
S

savegoodautonfg

New Member
May 11, 2005
1,085
0
0
Feb 15, 2006
#29
  • Feb 15, 2006
  • #29
Thanks you very much for all your help
 
S

savegoodautonfg

New Member
May 11, 2005
1,085
0
0
Feb 15, 2006
#30
  • Feb 15, 2006
  • #30
Also are they easy to install and i mean does it come with installation instructions when you buy them?
 
S

Sicarius428

Active Member
Jan 6, 2004
2,085
5
49
Feb 15, 2006
#31
  • Feb 15, 2006
  • #31
Have the subframe connectors welded in with all four tires on the ground or bearing the weight of the car. The full lenth cover a larger portion of the subframe giving it more contact area with it to make the chassis more rigid. If you are on a budget. Remove the air silencer on your air filter and put a K&N air panel in there. Forget about the Cold Air Intakes unless you are trying to clean up the engine bay. They really don't have any gains over the stock setup with a K&N. Rear gears will help a lot too. If this is a daly driver, I suggest 3.55 for a 5 speed and 3.73 for an auto. The FMS brand of gears are hard to beat so stick with those. One of the bigger bottlenecks on the 5.0s is the intake. I suggest getting your stock one ported by tmoss or buying a GT40/Cobra or Edelbrock. This will give you more power without sacrificing your low end. If you are on a budget PM tmoss or here's his website. http://www.tmossporting.com/ . Then you should think about the MAF and throttlebody.
Kevin
 
S

Sicarius428

Active Member
Jan 6, 2004
2,085
5
49
Feb 15, 2006
#32
  • Feb 15, 2006
  • #32
The stock headers are fine. You won't really see any improvement untill you hit the 300 HP mark. UD pullies can help. It is either hit or miss wheather your engine will respond to them well. You can run into cooling issues or charging issues... or both. Either way definately get one of the "street" sets.
Kevin
 
S

savegoodautonfg

New Member
May 11, 2005
1,085
0
0
Feb 25, 2006
#33
  • Feb 25, 2006
  • #33
Sicarius428 said:
. Remove the air silencer on your air filter and put a K&N air panel in there.
Click to expand...

Where can i find the air silence and what do you mean by a K and N air panel?
 
S

savegoodautonfg

New Member
May 11, 2005
1,085
0
0
Feb 25, 2006
#34
  • Feb 25, 2006
  • #34
Sicarius428 said:
e. I suggest getting your stock one ported by tmoss or buying a GT40/Cobra or Edelbrock. This will give you more power without sacrificing your low end. If you are on a budget PM tmoss or here's his website. http://www.tmossporting.com/ . Then you should think about the MAF and throttlebody.
Kevin
Click to expand...

What does porting your head do?
 
S

savegoodautonfg

New Member
May 11, 2005
1,085
0
0
Feb 25, 2006
#35
  • Feb 25, 2006
  • #35
I want to get a TB and A MAF next. Considering my engine is mostly stock what should i get like brand and mm's. Please reply. Thanks again.
 
I

IntenseBlue

Member
Jul 10, 2005
946
0
16
Feb 25, 2006
#36
  • Feb 25, 2006
  • #36
savegoodautonfg said:
Where can i find the air silence and what do you mean by a K and N air panel?
Click to expand...

You don't need to worry about it. Your cold air intake fixed this. The silencer is this plastic piece that pops out of the airbox surrounding the filter that makes up half of the box. A K&N air panel is just a highflow box-shaped (like the factory one) air filter.
 

tmoss

Gettin Wired
Founding Member
Jun 28, 2001
7,153
32
128
Saint Louis, MO
Feb 26, 2006
#37
  • Feb 26, 2006
  • #37
savegoodautonfg said:
What does porting your head do?
Click to expand...

He's talking about porting the intake, not the heads. To see what it will do for you, go to my website (see signature for link) and in the "Photo Galleries" there is a folder of stock intake results.
 

gcwh02

New Member
Jun 20, 2005
515
0
0
pottstown, PA
Feb 26, 2006
#38
  • Feb 26, 2006
  • #38
savegoodautonfg said:
What does porting your head do?
Click to expand...
If you arent scared to spend some money, your best bet would be buying some aluminum heads for $1000-1300. Great upgrade, loads of horsepower, and loosing some weight off that front end. Popular heads on here are AFR or Trickflow, some Edelbrock.
 

gcwh02

New Member
Jun 20, 2005
515
0
0
pottstown, PA
Feb 26, 2006
#39
  • Feb 26, 2006
  • #39
savegoodautonfg said:
I want to get a TB and A MAF next. Considering my engine is mostly stock what should i get like brand and mm's. Please reply. Thanks again.
Click to expand...
As for TB, I have heard nothing but good things from accufab. I have a bbk and like it and had no problems. Depending on if you are keeping your engine mostly stock go with 65mm. If you are going to upgrade your heads and cam go with 70mm. Some people will say 70mm will hurt your performance on stock engine but i beg to differ since I have 70mm with my stock head cam.

And for MAF, look a couple posts back, Intenseblue covered that.
 

srothfuss

Last night I stabbed the same guy 7 times in a row
Oct 17, 2004
1,796
3
0
Woodward Ave.
Feb 26, 2006
#40
  • Feb 26, 2006
  • #40
savegoodautonfg said:
I want to get a TB and A MAF next. Considering my engine is mostly stock what should i get like brand and mm's. Please reply. Thanks again.
Click to expand...


First what is your overall (end goal) for the car? I know that we all want to make them as fast as possible while we upgrade but understanding if you want a S/C, Turbo, Nitrous or Naturally Aspirated?

TB brands have been mentioned already: Stick with a 65mm unit for now is my recommendation

Accufab
BBK
Holley (?)
the 65mm unit off a Explorer 5.0L (TMOSS has the write up for installing it)


The MAF suppliers have also been mentioned already: The reason I asked about your plans come into play right here. If you buy one for the stock setup you will have to replace it or have it recalibrated for larger injectors the further you move away from a stock setup: I go with a 73mm C&L or similar for now (you can alway's resale them on eBay as you change things)

C&L
The new Pro-M site (Daggar has the link in his sig)
 
Prev
  • 1
  • 2
  • 3
Next
First Prev 2 of 3 Next Last
You must log in or register to reply here.

Similar threads

J
Low RPM jerking
  • Justinkins
  • Jul 8, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
5
Views
245
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 11, 2026
fasterthangas
F
A
Resolved Electrical Help Please
  • Alabama
  • Jan 22, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
2
Views
378
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jan 22, 2026
AeroCoupe
L
Help with 1986 GT 5 Speed Please
  • Lcasada1999
  • Mar 20, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
7
Views
397
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 21, 2026
CAMTWO1070
Electrical 89 fox AC help please
  • Fast89GWILL
  • Dec 5, 2024
  • Fox 5.0 Mustang Tech
Replies
5
Views
666
Fox 5.0 Mustang Tech Dec 18, 2024
Mindseye007
T
Greetings from a guy who needs help with a foxbody.
  • thefonztm
  • Mar 21, 2026
  • The Welcome Wagon
Replies
16
Views
687
The Welcome Wagon Mar 22, 2026
Noobz347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?