please help

terryo · May 1, 2007

i have a 87 vert with a bad 5.0, i have an 84 5.0 from a mustang i bought. gt40p heads can get anything that a friends salvage yard has in stock but i need to know what to ask for, numbers or application will be only a toy to see if i can build a ford that will run as fast as his chev. can get a stroker kit
Unuesd Sub-frame connectors witout seat braces $50

70mm TB and spacer with IAC and EGR valve, unsure of brand $80

Used Motorsports 50oz balancer part number M6316 A50 $125

Used set of Ford OEM 373 gears with bearing still on pinion $40

Used motorsports shorty unequal headers $75

4 banger front springs $40

New CAT sfi approved 157 tooth 28oz manual flywheel, steel $125

NEW 347 Rotating assm
MAHLE race pistons, flattop and oil ring does not intersect ring land
HAWKS RACING SERIES 8000 NODULAR IRON CRANKSHAFT WITH STD/STD SB FORD JOURNAL SIZES
CNC PROFILE LIGHTWEIGHT FORGED I-BEAM RACE RODS W/ARP BOLTS
PIN FIT PISTONS PISTON PINS AND RACE PROVEN LOCKS
(NOTE: PISTON PIN BORE DOES NOT INTERSECT THE OIL RING GROVE... TO ELIMINATE OIL USAGE PROBLEMS COMMON WITH JE/SRP PISTON EAGLE KITS AND MOST OTHERS!!
NEW KING RACE STD/STD ROD AND MAIN BEARING SET
PREMIUM MAHLE MOLY RING SET
$750

can i use it what cam ect anything will help i am a chrysler tech trying to change thanks terry also if you have anything to sale i need please also let me know

terryo · May 4, 2007

thanks to every one that jumped in to help convinced me how helpfull this site really is terry

HISSIN50 · May 4, 2007

I have no idea what you're asking. The list of stuff with prices afterwards kinda threw me for a loop. Others might have felt the same way.

Good luck.

terryo · May 4, 2007

that list is all stuff available to me locally but i dont know what will work this will not be a daily driver just a toy thinking possably change to carb and a 460 or chev 406 have a 302 and stp heads with an explorer intake but what else as far as cam should i put that stroker kit in it ? will only build it once i hope thanks terry

Aryan15 · May 4, 2007

HISSIN50 · May 4, 2007

Ok, I kinda get ya. I can only comment on the parts listed themselves, and only a few at that.

For an engine that breathes decently, the TB might be worthwhile for ya. This will kinda depend upon your MAF/MAS, as that may be the limiting factor (on a budget build, use a 94-95 meter. It's 70 MM).

Not sure what the balancer is, but you're getting towards the price of a new, quality SFI balancer for 125 bucks. The choice for my last one was a Pioneer SFI unit. They're about 170 new. It's way overkill for me but is a real nice piece.

I think used gears are hit or miss. If you are doing the install yourself, they can be worth a shot. Otherwise, I'd do new gears or look for a complete rear with the gear you want. Unless you do it often, setting up gears is a PITA.

Headers: ensure the flange isnt warped.

I've never run 4 banger springs.

Good luck.

whtpny · May 5, 2007

Not too knock you guy, but break up your questions and such with some puncuation. Everything is running together and we are a bit confused.
Do some searches on cams and all the other stuff you want and the car will run great.

88mouse · May 5, 2007

as far as a cam to run in a 347. I think that the TFS 3 cam would be a bad a** cam to run in one. Thats what i'am trying to get my buddy to run in his 347.

The price on that balancer is too much. I pay less than that for mine new.

You said that you were a mopar guy? I love mopars. You have any motors or parts laying around for a 71 road runner?

please help

terryo

New Member

terryo

New Member

HISSIN50

"How long does it take to get help in here?

terryo

New Member

Aryan15

Member

HISSIN50

"How long does it take to get help in here?

whtpny

New Member

88mouse

New Member

Similar threads

please help

New Member

New Member

"How long does it take to get help in here?

New Member

Member

"How long does it take to get help in here?

New Member

New Member

Similar threads

Privacy & Transparency

Privacy & Transparency