• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

Please solve Vortech Tuner Kit Mystery

  • Thread starter Thread starter tylerdred
  • Start date Start date Aug 14, 2004
T

tylerdred

Founding Member
Sep 26, 2001
75
0
6
Chicago, IL
Aug 14, 2004
#1
  • Aug 14, 2004
  • #1
I've been searching around the forums all night now, and I really can't find a concrete answer as to WHAT is included in Vortech "tuner kits." Someone please break it down for me because this is really escaping me....

Here is the parts list for a complete Vortech Kit 01-02 V2-SQ Supercharger:

http://www.vortechsuperchargers.com/images/kitlist/4fl218-050_list.gif

Which parts are missing in the tuner kits?

I need to know right down to the brackets because I hear that you can get raped by Vortech if you need to buy them separately, and I don't want to get stalled in the middle of an install. I need to know which parts at the absolute minimum I need to run a simple, safe, daily-driven supercharger, not an all out boost machine. I hear that you need things ranging from a chip, injectors, fuel pump, MAF, boost pipe, dynometer, Tim, Modularfordpowerhouse, T&J, a mongoose, a cobra, a rabbit, and a fuzzy, small, green leprechaun.

Hopefully someone who has already gone this route can chime in....
 

yellow2kgt

Founding Member
Mar 18, 2002
175
0
0
Fishersville,va
Aug 14, 2004
#2
  • Aug 14, 2004
  • #2
The tuner kit includes everything you need to actually bolt the blower on. It has all brackets,hoses,belt, air filter, discharge tube, intake tube, etc..etc..

What it does not include(and you need for a safe tune) is.... injectors(I am running 30 lbs but I reccomend 42s,) Fuel pump (either steeda duals, 03 cobra tank and pumps, or maybe try the aviator pump that everyone is talking about,) larger mass air flow meter like the lightening unit (although some get by with the stocker,) and most importantly a good tune.

You should not need a powerpipe. My tuner kit came with a intake pipe but check with who you are buying it from. Their was a company that was selling tuner kits cheaper than other places but it did not come with the intake pipe.

I first looked into building my own kit. But I found it was cheaper to just buy everything in the form of the mongoose kit from T and J performance.
 
T

tylerdred

Founding Member
Sep 26, 2001
75
0
6
Chicago, IL
Aug 14, 2004
#3
  • Aug 14, 2004
  • #3
How is it cheaper??

Tuner Kit $2400
30# injectors $210
Walbro 255lph fuel pump $99
Diablo Chip $99 online
Diablo will custom tune the chip for you for a flat $120; you just have to take it to any performance shop for a reburn.

That comes to like $2938 not including shipping. Would it be safe to run the stock MAF as long as I get it custom tuned by Diablo?? It seems that is the general consensus among everyone (just tune it to be safe). I plan to use this car as a daily driver so I dont need insane amounts of power right now (under 400rwhp). What is the procedure to getting a chip burned by diablo? Has anyone done it? Do you send them your dyno sheet or something?
 

yellow2kgt

Founding Member
Mar 18, 2002
175
0
0
Fishersville,va
Aug 15, 2004
#4
  • Aug 15, 2004
  • #4
The main problem I see is the Walbro pump.
The Walbro pump was not made to work with the returnless system. If you really want to save a few bucks you should look into the aviator pump. I don't think it will run you a whole lot more then the Walbro.
Also If I were you, I would take your car to a good tuner and have a custom tune made for it on the dyno. I am just guessing that will run ~$600. If you go that route check with your tuner first about the stock MAF. They might be able to work with it and they might not.
 

cobra killer

Founding Member
Mar 28, 2001
2,325
0
46
dallas ga
Aug 15, 2004
#5
  • Aug 15, 2004
  • #5
tylerdred said:
How is it cheaper??

Tuner Kit $2400
30# injectors $210
Walbro 255lph fuel pump $99
Diablo Chip $99 online
Diablo will custom tune the chip for you for a flat $120; you just have to take it to any performance shop for a reburn.

That comes to like $2938 not including shipping. Would it be safe to run the stock MAF as long as I get it custom tuned by Diablo?? It seems that is the general consensus among everyone (just tune it to be safe). I plan to use this car as a daily driver so I dont need insane amounts of power right now (under 400rwhp). What is the procedure to getting a chip burned by diablo? Has anyone done it? Do you send them your dyno sheet or something?
Click to expand...


Never claimed to be the cheapest..But,i've never lost an engine..

That $99 walbro pump will eventually cost an engine...
 
W

WOT

Founding Member
Nov 26, 2000
2,817
0
46
Regina, Canada
Aug 15, 2004
#6
  • Aug 15, 2004
  • #6
Listen to the man. Tim knows what he is talking about. The following this man has should tell you something about his abilities.
 
3

3.8L_of_Pain

New Member
Jul 4, 2004
123
0
0
Southern California -- Orange County
Aug 15, 2004
#7
  • Aug 15, 2004
  • #7
yellow2kgt said:
The main problem I see is the Walbro pump.
The Walbro pump was not made to work with the returnless system. If you really want to save a few bucks you should look into the aviator pump. I don't think it will run you a whole lot more then the Walbro...
Click to expand...
Could someone post a link for this aviator pump? I am looking into the Vortech or NOVI 1000 kit and want to work out all these details before I buy anything.
 

yellow2kgt

Founding Member
Mar 18, 2002
175
0
0
Fishersville,va
Aug 15, 2004
#8
  • Aug 15, 2004
  • #8
http://www.modularmustangs.net/showthread.php?t=5232&highlight=aviator+pump

here is a link to a thread about the aviator pump. you might be able to PM 2002BLGT to get the part number. I also think he posts here on stangnet.
 
T

tylerdred

Founding Member
Sep 26, 2001
75
0
6
Chicago, IL
Aug 15, 2004
#9
  • Aug 15, 2004
  • #9
Would the setup work reliably with the aviator pump, 30# injectors, stock MAF, and a JMS chip?

Also, I think there was some talk in the boards (may or may not be true) that tim was starting to use walbro pumps in the mongoose kit. Is this true or way off?
 

cobra killer

Founding Member
Mar 28, 2001
2,325
0
46
dallas ga
Aug 15, 2004
#10
  • Aug 15, 2004
  • #10
tylerdred said:
Would the setup work reliably with the aviator pump, 30# injectors, stock MAF, and a JMS chip?

Also, I think there was some talk in the boards (may or may not be true) that tim was starting to use walbro pumps in the mongoose kit. Is this true or way off?
Click to expand...


Hell no.! I refuse to tune any 4.6 with a return style system and a walbro.I tried it on one car and it failed.Luckly we caught it before it got the engine.

tim
 
T

tylerdred

Founding Member
Sep 26, 2001
75
0
6
Chicago, IL
Aug 16, 2004
#11
  • Aug 16, 2004
  • #11
Thanks for setting me straight Tim.......Its probably no doubt that everyone says you are THE person to talk to about stang tuning.

Would it be safe to get the tuner kit, 30 lb injectors, use stock MAF, focus fuel pump, and a chip? I live in chicago, how could I get you to tune it for me?

Has anyone else run this set up?
 
R

RedGTvert

Founding Member
Nov 21, 1999
3,129
1
58
Wellington, FL
Aug 16, 2004
#12
  • Aug 16, 2004
  • #12
cobra killer said:
Hell no.! I refuse to tune any 4.6 with a return style system and a walbro.I tried it on one car and it failed.Luckly we caught it before it got the engine.

tim
Click to expand...

Timmy, you mean returnless, don't you?
 
You must log in or register to reply here.

Similar threads

Engine 347 Supercharge Planning
  • HeatShield
  • Oct 17, 2020
  • Fox 5.0 Mustang Tech
Replies
1
Views
3K
Fox 5.0 Mustang Tech Apr 27, 2021
Haste347
H
Part Suggestions 1996 / 1998 4.6L DOHC Mashup Engine Rebuild
  • JimmyJamTheHamSlam
  • May 28, 2020
  • SVT Tech Forum
Replies
1
Views
2K
SVT Tech Forum Aug 30, 2020
Adieu
T
Forced Induction Vortech Pulley Question (Long Read)
  • tinker451
  • Feb 23, 2020
  • Fox 5.0 Mustang Tech
Replies
0
Views
1K
Fox 5.0 Mustang Tech Feb 23, 2020
tinker451
T
A
Fuel & Tuning setup for upcoming 00' S/C GT Questions
  • alwayshi
  • Jun 20, 2019
  • SN95 4.6L Mustang Tech
Replies
0
Views
1K
SN95 4.6L Mustang Tech Jun 20, 2019
alwayshi
A
T
Help me solve a mystery
  • TheeMonster
  • Dec 1, 2019
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
9
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Dec 2, 2019
ThinBlue502
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?