Plenum Cover?

[jas142]

Does anyone know how to remove the plenum cover (The little piece with the running horse) and what its held on with? If I wanted to custom fabricate a replacement, how do you think I should attach it?

 

[Joel's98GT]

it's stuck on with glue. use glue.

 

[BlackenedSVT]

it's stuck on with glue. use glue.

Glue or that JB Weld/RTV Silicone Sealant?

 

[Tylerb59]

Doubled Sided 3M.

 

[BlackenedSVT]

Doubled Sided 3M.

Now its stuck on with double sided 3m?

 

[artificial HP]

duct tape

 

[squares98]

its magnetic, no need for glue

 

[twogts4us]

It's dbl sided tape - use a screwdriver to pry it up and off.

 

[dsg_gt2004]

it's tape

use a blowtorch

 

[twogts4us]

it's tape

use a blowtorch

Naw, any decent air hammer will do. Or, you can rent a jack hammer. If all else fails, hit the army supply store and see if they have any hand grenades.

 

[GDawg]

Dremel...

Damn, Stangnet is so helpful....

 

[twogts4us]

Dremel...

Damn, Stangnet is so helpful....

The question was how to remove the OEM plate and how to attach a new custom one...are you saying a Dremel is the solution here?

OK, the true answer (for both questions) is: Double sided tape.
I posted this in post #8 above.

 

[streetstang03]

damn......how many different answers are there? just go rip it off and see how it was attached. anything can be put back on with the right attitude and a case of beer.