what do you guys recomend for these two parts? I plan on ordering them this weekend. Ive heard stuff about the dragon acccufab and c&l pleunum as for throttle body I know nothing.
plenum/tb
- Thread starter Cobra5337
- Start date
downsouthman1
Member
I went w/ a C&L Intake Plenum & Accufab 75mm TB combo. If you go w/ C&L get a 75mm TB. If you go w/ Accufab's TB get a 70mm TB. The Dragon can use either or, if my knowledge base serves me correctly.Cobra5337 said:
daver01
Founding Member
good article on comparing the different tb&p's below. u may have already seen it? interesting though.
modular mustangs plentum test
modular mustangs plentum test
Bone Racing
New Member
daver01 said:
anyone have the accufab plenum? that article said that it gave the most gain and was pretty good.
todd4566
Founding Member
Cobra5337 said:
After reading that modular depot write-up, I chose the Accufab. Looks the best IMO, and definitely made a noticeable difference. I never expected to feel a thing, but I was pleasantly surprised. I haven't even changed my stock T-body out yet either. I am curious how the other plenums would do w/ the 75mm T-body's, but I felt the Accufab would perform the best. Either way, the plenum change is a surprising mod to say the least.
hognutz
New Member
I think as long as you get the c&l with a 75mm or an accufab with 70mm. you will be happy. the accufab looks to give the best average gain so if you can afford it that is the one to buy.
wms004
Founding Member
The Dragon would have done better with the 75mm t/b as well considering the test Dragon was a 75mm inlet version according to my conversations with the dragon's engineer. Just because the dragon is a small company in comparison with C&L its numbers prove to be just as effective in putting nice numbers on the dyno.
-wade
-wade
PG98GT
Founding Member
I went with the Dragon, and even with the currently installed 70mm t/b, I can feel the difference above 3000 rpms. I'm very happy with the Dragon.
Similar threads
