• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Engine Popping/misfire

  • Thread starter Thread starter Cory Berg
  • Start date Start date Feb 22, 2013

Cory Berg

Active Member
Sep 25, 2012
108
3
29
San Jose, CA
Feb 22, 2013
#1
  • Feb 22, 2013
  • #1
So I've been chasing this problem for about two months now and I've been slowly replacing parts that needed to be replaced.

At a cruising speed, no matter the speed, if I roll onto the throttle there will be several loud pops that sound like misfire. After the pops, it sounds/feels like a switch and all the power picks up. Sometimes when I roll onto the throttle there are no pops but there is an obvious lack of power as the motor winds up.

So far I have replaced rotor, cap, wires, tps, iac, replaced with a known good coil.
She is an '87 running speed density, also.
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,220
17,902
224
Massachusetts
Feb 22, 2013
#2
  • Feb 22, 2013
  • #2
Run the check engine codes.

87's do not have a check engine light, so no CEL will ever light up if codes are present.

Right off the top of my head, possible causes are faulty/dirty EGR, vacuum leaks, bad O2's or a bad BAP sensor.

If you run the codes (engine off and engine running) you'll get a better starting point
 
You must log in or register to reply here.

Similar threads

S
Engine 1990 5.0 bogs and pops over half throttle
  • Sander
  • Aug 1, 2025
  • Fox 5.0 Mustang Tech
Replies
4
Views
323
Fox 5.0 Mustang Tech Aug 2, 2025
AeroCoupe
S
Fuel ‘88 GT Runs Rich Cold — Fixes Itself When I Unplug Sensors (ECT, MAF, O2, etc.)
  • Sufarry
  • Nov 6, 2025
  • Fox 5.0 Mustang Tech
Replies
12
Views
764
Fox 5.0 Mustang Tech Nov 9, 2025
Mustang5L5
Engine 1990 LX 5.0L EFI Mustang Fuel Management Problems - HELP!
  • 5.0LXStanger
  • May 25, 2025
  • Fox 5.0 Mustang Tech
  • 2 3
Replies
45
Views
2K
Fox 5.0 Mustang Tech Jul 11, 2025
5.0LXStanger
A
Rough idle - cylinder 1 and 6 misfire HELP
  • austindavies935
  • Jul 24, 2025
  • SN95 4.6L Mustang Tech
Replies
12
Views
662
SN95 4.6L Mustang Tech Jul 24, 2025
gkomo
C
Engine Code 13 and high idle
  • CmdrDerp
  • Dec 14, 2024
  • Fox 5.0 Mustang Tech
Replies
17
Views
848
Fox 5.0 Mustang Tech Dec 21, 2024
manicmechanic007
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?