Porting PI Heads - Need Pictures

M

MatthewP

Founding Member

Dec 7, 2001

355

0

0

Calgary, Alberta

Oct 8, 2005

#1

• Oct 8, 2005

• #1

I'm going to take a crack at porting some PI heads for my '02 GT and was hoping that someone would take pity on me and post some pictures of their ported heads. I've been having a hard time finding any pictures and it would be helpful to have a little guidance as I start on the job. I'd also welcome any suggestions on the job.

If you would share your pics but don't want to post them, PM me.

-Matthew

 

billfisher

Active Member

Jul 17, 2005

1,296

4

38

huntsville, AL

Oct 8, 2005

#2

• Oct 8, 2005

• #2

i didn't take pics. just remove swirl brows, open the bowls, and 3 angle it. buy the best valves and back cut them. mill .025 and leave it. you can ruin flow and the heads too easy.

 

M

MatthewP

Founding Member

Dec 7, 2001

355

0

0

Calgary, Alberta

Oct 9, 2005

#3

• Oct 9, 2005

• #3

Thanks for your help. Anyone else have any suggestions before I let this thread drop down the list?

-Matthew

 

CanadaStang

New Member

Sep 7, 2003

2,093

1

0

Mb

Oct 9, 2005

#4

• Oct 9, 2005

• #4

Unless you have experience porting heads it's best not to try. You could how ever clean up the rough casting in the ports.

 

crazynorwegian

20+ Year Stangneter

Nov 6, 2003

267

0

16

azusa, ca

Oct 9, 2005

#5

• Oct 9, 2005

• #5

this is the best one I can find of my mph 2 1/2 heads

 

Attachments

• IMG_1117.webp

  53 KB · Views: 151