• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

possible coolant leakage?

  • Thread starter Thread starter deadlast
  • Start date Start date Aug 11, 2006

deadlast

New Member
Mar 30, 2005
495
0
0
Belmont, MA
Aug 11, 2006
#1
  • Aug 11, 2006
  • #1
yea so i just installed a new intake manifold, and after about 2 days of driving i got a low coolant light. now i did notice my left tailpipe had more than normal condensation in it, and my catch can for oil on the pcv line was gross... it looked like coffee so im guessing it was water, oil, some antifreeze?
does all this mean i am leaking coolant at the lower intake seal? if it does, is there any change in the cars performance?
 

deadlast

New Member
Mar 30, 2005
495
0
0
Belmont, MA
Aug 11, 2006
#2
  • Aug 11, 2006
  • #2
bummp
 

fox-gt

Member
Feb 28, 2004
204
0
17
TN
Aug 11, 2006
#3
  • Aug 11, 2006
  • #3
deadlast said:
bummp
Click to expand...

Mine is doing the same thing after the rebuild. The mechanic told me the water in the tail pipes was not anti-freeze (normal condenstation) and the coolant was coming from a crack in the water pump (which they replaced). They didn't find any coolant on the spark plugs either. I was concerned about the water in the pipes. It is the same as you described, it is dirty black but doesn't smell like anti-freeze. Happens everytime I start the car after it has had about 15 minutes to cool down. It never did that before the rebuild (heads, cam and intake)
 

deadlast

New Member
Mar 30, 2005
495
0
0
Belmont, MA
Aug 11, 2006
#4
  • Aug 11, 2006
  • #4
66mustang93 said:
Mine is doing the same thing after the rebuild. The mechanic told me the water in the tail pipes was not anti-freeze (normal condenstation) and the coolant was coming from a crack in the water pump (which they replaced). They didn't find any coolant on the spark plugs either. I was concerned about the water in the pipes. It is the same as you described, it is dirty black but doesn't smell like anti-freeze. Happens everytime I start the car after it has had about 15 minutes to cool down. It never did that before the rebuild (heads, cam and intake)
Click to expand...

im just worried that my catch can inline of the pcv is catching so much liquid
 
You must log in or register to reply here.

Similar threads

J
Engine Coolant leak from oil filter
  • jr273
  • Mar 26, 2026
  • SN95 4.6L Mustang Tech
Replies
9
Views
332
SN95 4.6L Mustang Tech Mar 31, 2026
squeak93
Engine Looking for suggestions and or ideas
  • PonyGTrider
  • Aug 25, 2026
  • Fox 5.0 Mustang Tech
Replies
17
Views
461
Fox 5.0 Mustang Tech Sep 7, 2026
PonyGTrider
G
1991 GT 5.0 running hot
  • gvanginkel403
  • Jul 1, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
5
Views
232
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 2, 2026
General karthief
Engine Catch Can or not?
  • R82148V
  • Mar 4, 2026
  • Fox 5.0 Mustang Tech
Replies
9
Views
420
Fox 5.0 Mustang Tech Mar 6, 2026
ctandc
C
X
Engine 5.0 Head Gaskets installed wrong block coolant passages???
  • Xam Sirrah
  • Jul 21, 2025
  • Fox 5.0 Mustang Tech
Replies
12
Views
833
Fox 5.0 Mustang Tech Dec 22, 2025
Qtrhrse23
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?