Post pics of how your foxbody currently sits

[Steel1]

I like the cowl side graphics. I could do that

Thanks.
It was the first time I tried using vinyl, definitely something that takes patience and a lot of youtube videos.
The hood stripe took me about 3hrs. cowl stripes were easier took about 2hrs. to do both sides.
If you ever want to do it look up CK wraps on youtube, guy is a master and has some great informational content.

 

[Potomus Pete]

was there bubbles that lasted for days. I want one stripe up the middle,,,white

 

[Steel1]

was there bubbles that lasted for days. I want one stripe up the middle,,,white

No bubbles at all , that's part of the process you need to work out all the bubbles/ imperfections.
It was a tricky process but the vinyl I used is pretty forgiving.
I bought a vinyl installation tool kit from amazon along with the vinyl and knifeless tape.
Again before you due anything watch CK wraps on youtube, very helpful.

 

[Rdub6]

was there bubbles that lasted for days. I want one stripe up the middle,,,white

Like a racing stripe, or like the ‘85/‘86 hood decals?

 

[lemosley1973]

car looks great, I did the same thing about 2 or so years ago. did a little more damage to mine... ended up taking a year to put back together as I found rust and hackery prior repairs underneath

Hood pins and a hood latch. Got it. Thanks for the free lesson!

 

[Reddevil91]

Yeah @Reddevil91, whites easy. Funny, 3 of my Families 4 cars are white.

Yeah my truck is white, her Cadi is white. I’ll probably get a new truck at some point and stick with white.

 

[BlakeusMaximus]

Yeah my truck is white, her Cadi is white. I’ll probably get a new truck at some point and stick with white.

Didn't happen on purpose.

 

[Steel1]

Got out for a ride yesterday, stopped by my buddies house.
Sitting in his garage I looked out to the driveway and figured I'd snap a quick pic.

 

[HotFox]

Finally finished the oil change, put fresh fuel in and dropped the battery back in. Just need to top off with water or I may switch to antifreeze and keep it on the street for a while.

 

[90sickfox]

Well long story short I had a Mach I hood with pins that I forgot to put in, good thing I was going about 15 mph when it flipped up.
Did some minor damage to hood/cowl but enough that I went back to my stock hood, cowl panel was straightened and repainted.
Of course I run a 393w so out came the cut off wheel ......fast forward, after purchasing an early 80s GT style scoop and some satin
vinyl wrap (always wanted to try some graphics) this is what I came up with.

Looks good...but I think the scoop needs some black just on top. My $ .02

 

[DudeStang]

Still slowly getting the residue off from the body molding stripe....got most of the front end done yesterday

 

[90sickfox]

Still a work in progress but coming together....slowly.

 

[elarm1]

The aftermarket front bumper never fit right so I put a stock one on. Wanted a steel hood as the glass one kept cracking. Lower bumper pieces cracked from slipping off the jack stands.(not harbor Freight jacks). Added some Roush wheels and I finally got my electric fan installed

 

[elarm1]

I also been working on my late fathers 90 S10 Blazer. Its been sitting on our property for 10 plus years but it was his pride and joy at one point. I'm bringing it back to life!

 

[Boostedpimp]

I accomplished allot this weekend.. worked on the Gt in a friends driveway lol, clean up my coupe a little, waxed my bike, stretched the legs of the syclone, and even rinsed off the daily driver hatch for first time in probably two years

 

[TOOLOW91]

I also been working on my late fathers 90 S10 Blazer. Its been sitting on our property for 10 plus years but it was his pride and joy at one point. I'm bringing it back to life!

Still love them !

 

[mikestang63]

Still slowly getting the residue off from the body molding stripe....got most of the front end done yesterday

rubber eraser wheel will take that off easy

 

[BlakeusMaximus]

I accomplished allot this weekend.. worked on the Gt in a friends driveway lol, clean up my coupe a little, waxed my bike, stretched the legs of the syclone, and even rinsed off the daily driver hatch for first time in probably two years

My old boss back in the day had a Typhoon. Quick little F-er! Don't see those everyday @Boostedpimp, Nice!

 

[BlakeusMaximus]

Still slowly getting the residue off from the body molding stripe....got most of the front end done yesterday

Reminds me of my car when I first got it!

 

[Boostedpimp]

My old boss back in the day had a Typhoon. Quick little F-er! Don't see those everyday @Boostedpimp, Nice!

Thanks man, I've owned two Typhoons Only pic I have of one on my phone to share