Post them pics!!!!!!

[Markus]

Gulfstream Aqua ist sehr schon im Sonnelicht!!

Hi,

das ist clear water aqua

Markus

 

[edgars23]

It actually fit prety good except that I had to trim a lot of the top to get it to contour to the bottom of the dash. I'm not quite done with it yet, I need to make a plate or cover to go right under the radio bezel, and I need to heat up the top side pieces so I can bend them in and have it clear the glove box door and ash tray.

I'm debating wether or not I should convert parking brake to the fox parking brake.

I may do this with another console and see if it comes out any nicer seeing as I have a few laying around.

What year did teh console come out of? and what mods (beside trimming it to fit flush to the dash) did you have to do?
I have been wanting a center console for my 67 coupe and this looks good. I's like to give it a try.

Also, did you custom make your trunk liner?
-Edgar

 

[68stang351]

What year did teh console come out of? and what mods (beside trimming it to fit flush to the dash) did you have to do?
I have been wanting a center console for my 67 coupe and this looks good. I's like to give it a try.

Also, did you custom make your trunk liner?
-Edgar

It is from an 87-93 Mustang, and I didn't do any other trimming except on the top to contour it to the dash. There are two screw in the back of it that anchor it to the trans tunnel. It fits really nice after you get the top trimmed up right. I'm even thinking about converting my parking brake to the floor mount so I can have the handle in the console too.

Yeah, I made my trunk panels, I used sheets of birch wood. I cut some templates out of cardboard first.

 

[edgars23]

Thanks for the info, I will have to look into doing it myself.

 

[EP429]

My 68

 

[MrBobMarley]

Wow lotta new people here! Nice rides too. Found my way back to stangnet after a couple years.

Old 1965 coupe....289, 5 speed, 16" TT II's, stock otherwise......sold in 06.

View attachment 332035


Just got this 2 weeks ago. Guess the classic bug is never out of your system


View attachment 332037

View attachment 332039

View attachment 332041

View attachment 332043

View attachment 332045

View attachment 332047

View attachment 332049

I never thought I would get one. I'm gonna hang on to this one.

 

[67topless]

Wow! That is a very nice addition to the family!

 

[MrBobMarley]

Thanks!

 

[jlangholzj]

awww man!! talk about an upgrade

we reaaally need to get working on that engine!!

 

[68stang351]

Can we make this a sticky please?

 

[jspagna1]

Man there are some nice lookin classics out there. I've seen some of the cars posted here and they are still impressive!

http://www.putfile.com/album/0/jspagna1/?page=1

 

[JDS68Stang]

1968 coupe, I6 auto.

 

[64point5]

Here is a Pic of my 1964.5 coupe with the 260 and C4.

 

[stang66myway2]

most of you all have already seen my little project but since everyone was posting
there pics i thought i would also.

 

[my70stang]

b-e-a-utiful car

 

[blown65]

Found some old and newer pics of my stang. First ones are prob from around 1986 or so when I was 15.

This was probably around 2000 or so when I first did the blower and paint was pretty much just done.

Now currently without the blower.

Out at the drags with my dads camaro.

 

[chepsk8]

You all have seen my latest...

 

[My71mach1]

!971 Mach 1

My Project
new Radiator Support
new Front fender aprons
new pass side fender
new hood
new front and rear valence
new quarters
new tail light panel

Was Purchased from a 18 year old which was his first car it had a dent in every panel except the doors
which was amazing
has been 2 years so far and finally the metal is back to almost normal....

View attachment 300353

View attachment 300355

View attachment 300357



View attachment 300359

View attachment 300361
View attachment 300363
View attachment 300365

 

[bnickel]

You all have seen my latest...

if ever there was a car that was screaming for bigger wheels, that's it.

 

[afast93stang]

Here is my 1967 Coupe that I just picked up in August. Its currently on jackstands while i do the floor pans which should be completed by the end of this weekend.

My wifes saturn got kicked out of the garage...