Post your 302 based stroker combo's

Grn92LX

Fidanza Man!

Founding Member

Jan 14, 2001

6,819

64

129

New York

May 13, 2006

#1

• May 13, 2006

• #1

Lets see what we have, post 'em up Any track or dyno numbers too.

 

J

jghood13

New Member

Oct 2, 2003

160

0

0

NY

May 13, 2006

#2

• May 13, 2006

• #2

347
Roush 200 Heads Millied to 58cc
Fms 1.6rr
Comp Custom Grind
1 3/4 Long Tubes
Edelbrock RPM Air Gap
Demon 650 Carb

 

Grn92LX

Fidanza Man!

Founding Member

Jan 14, 2001

6,819

64

129

New York

May 14, 2006

#3

• May 14, 2006

• #3

^

 

N8Miller

I need NOS....make it 2 of the big ones

Founding Member

Jul 26, 2000

2,661

0

0

Kingston, PA, USA

May 14, 2006

#4

• May 14, 2006

• #4

331
vic jr heads
jay allen camshaft
TFS R intake
etc, etc, etc....

no track times, no dyno numbers. estimates: near 400 rwhp and low 12s at the track.

 

Rick 91GT

Mustang Master

Nov 29, 1999

9,692

95

99

PA

May 14, 2006

#5

• May 14, 2006

• #5

Well I just finished assembling Bill Perkins RAM Racing combo, 3rd pass out went a 9.89 @ 139mph not even tuned yet, motor was started late Sat night for the first time, set the time fuel pressure and loaded up the trailer...NA on DRAG RADIAL Not bad for 345ci

Sorry I have to keep these details to myself.

 

Grn92LX

Fidanza Man!

Founding Member

Jan 14, 2001

6,819

64

129

New York

May 14, 2006

#6

• May 14, 2006

• #6

Rick, is that a .020" over bore 3.40 stroke crank combo? I want a street car that fast

Can you give any suspension info away? I want to hook on a drag radial. I set my pinion angle to about -2* or so I think. I want to recheck to be sure. I think the yoke angle was 86* and the driveshaft angle was 88* so 86-88 = -2*.

 

cobradvm

New Member

Sep 2, 2003

245

1

0

Woodinville, WA

May 14, 2006

#7

• May 14, 2006

• #7

331, ported TW heads, Jay Allen cam, Systemax intake and all the usual other crap.

 

Rick 91GT

Mustang Master

Nov 29, 1999

9,692

95

99

PA

May 14, 2006

#8

• May 14, 2006

• #8

Grn92LX said:

Rick, is that a .020" over bore 3.40 stroke crank combo? I want a street car that fast

Can you give any suspension info away? I want to hook on a drag radial. I set my pinion angle to about -2* or so I think. I want to recheck to be sure. I think the yoke angle was 86* and the driveshaft angle was 88* so 86-88 = -2*.

Click to expand...

Actually it's a .060" over bore, custom stroke crank, custom rod...High RPM. I'm really excited to see where we can go with the combo, but I think 9.40's are acheivable.

His suspension is typical aftermarket really nothing wild but the double adjustable Strange shocks in the rear, UPR stuff up front and out back.

 

J

jerryD

Founding Member

Mar 16, 2000

1,061

0

37

Gladstone, MO

May 14, 2006

#9

• May 14, 2006

• #9

331
Z304A heads
Track Heat intake
274HR bumpstick

made a few passes at the track. not even heating up the DR's, got 13.2 @ 108. launch i think was around 2500 dumping clutch, and spining in third down the track.

 

Grn92LX

Fidanza Man!

Founding Member

Jan 14, 2001

6,819

64

129

New York

May 16, 2006

#10

• May 16, 2006

• #10

Anyone else wanna post about their street cars?

 

Modular2v

Founding Member

Jun 30, 2002

3,222

23

99

oklahoma

May 16, 2006

#11

• May 16, 2006

• #11

331, 69 fully ported windsor heads with 2.02/ 1.72 valves, tf stage 3 cam. Weiand stealth intake, holley 750 dp, long tubes

 

S

stroked8e5

New Member

Jun 18, 2005

28

0

0

May 16, 2006

#12

• May 16, 2006

• #12

347
Y303 cyl. heads with ports cleaned up a little
X303 cam
cheap no name edelbrock RPM Airgap knockoff intake
Holley 750

Ran it on sunday. The one time I got it to hook it went 13.23 @ 105 and 1.88 60'. With 3.73's and shifting at 6000 I could almost go through the traps in third so I think 4.10s might be in order.

 

Roland69

Sergeant Tangnet

Sep 17, 2005

2,867

2

58

Port Elgin, Ontario

May 16, 2006

#13

• May 16, 2006

• #13

If Rick wasn't so far from me I would be getting him to build my motor.... Dayyyyumn

 

Rick 91GT

Mustang Master

Nov 29, 1999

9,692

95

99

PA

May 17, 2006

#14

• May 17, 2006

• #14

I can ship

That motor has some very nice, expensive custom parts...

 

fiveoho

15 Year Member

Apr 28, 2005

1,958

16

69

TN

May 17, 2006

#15

• May 17, 2006

• #15

Rick 91GT said:

I can ship

That motor has some very nice, expensive custom parts...

Click to expand...

theres a possibility i may need to have someone else build my motor...not sure yet. problem is, i already have alot of my parts.

when u can , please PM me. like i said, nothing set in stone but if it came down to it, could i ship you what i have then you build then ship back to me?

this is all very sketchy right now but maybe you can give me a ballpark on a price just for labor ( 306 ) and shipping.

preciate it man


-sry to intrude on the thread btw

 

Rick 91GT

Mustang Master

Nov 29, 1999

9,692

95

99

PA

May 17, 2006

#16

• May 17, 2006

• #16

Please e-mail me all your info, what parts you have and will supply and your shipping address. Rick91GT@suscom.net

:OT:

 

N8Miller

I need NOS....make it 2 of the big ones

Founding Member

Jul 26, 2000

2,661

0

0

Kingston, PA, USA

May 17, 2006

#17

• May 17, 2006

• #17

Rick 91GT said:

Please e-mail me all your info, what parts you have and will supply and your shipping address. Rick91GT@suscom.net

:OT:

Click to expand...

shameless promo



grn92lx: ummm, these ARE street cars!

 

Rick 91GT

Mustang Master

Nov 29, 1999

9,692

95

99

PA

May 17, 2006

#18

• May 17, 2006

• #18

Just trying to take it out of this thread......

 

Grn92LX

Fidanza Man!

Founding Member

Jan 14, 2001

6,819

64

129

New York

May 18, 2006

#19

• May 18, 2006

• #19

Its you Rick, so i'll let it slide

 

Brads Coupe

Sweeeeet!!!

Founding Member

Apr 18, 2000

2,838

0

0

Calgary , Alberta, Canada

May 18, 2006

#20

• May 18, 2006

• #20

Eagle 331 rotating assembly (internally balanced)
Track Heat heads ported polished
1.7RR's
Holley Systemax II intake port matched with heads
Cam Motion Custom Cam

...and all the goodies to go with it.

Hoping to make close to 700rwhp this year.