Post Your Trick Pic

[Grabbin' Asphalt]

Well, here's one thing I haven't mentioned in my various other "pic whore" threads.
It's made in Italy by "Personal". It's a rare wheel and was used in a few 89SSC's. I picked it up a few years ago as a back up wheel for my SSC. Its probably worth $1000 or more to the Saleen nuts. LOL
But I like it in my vert!

Sorry for the terrible pic.

Interesting, least put your other pics here, others over seas or away from current online content can look later. Besides you got some pretty great personal trick outs!! May redo my trunk cover now cause of your pic...lol

 

[Grabbin' Asphalt]

Custom turbo kit

Tilt with he sweet tri spoke wheel


The hidden battery cut off switch


nothing too earth shaking but I like it.

You put that trunk bushing on yet

 

[GroverDill]

Bushings, I don't need no stinking bushings!

I actually never noticed it was gone!

 

[Gearbanger 101]

made a quick panel to house my PLX touchscreen boost and afr gauge. It matches much better than the pic shows due to camera flash

Where did you relocate your hazard and rear defrost switch to?

 

[Grabbin' Asphalt]

This is how I tricked out my sound system, mounted amp with zip ties with tiny holes through the carpet flap. One 12" sub and box, both from best buy. It ROCKS my hatchback real nice!!! Installed kitchen latches on the rear side panels to hold the wood cover. Will repaint it soon cause I ran out of paint and time. I did buy a black pull out privacy cover but I'm afraid the sub will make it rattle and it may not hide the amp and set up enough, jury still is out doing that way, but it SOUNDS Amazing like this

 

[madspeed]

Where did you relocate your hazard and rear defrost switch to?

They must remain plugged in as the turn signals are dependant upon them. I simply removed the switch and unplugged it, then pulled the wiring down from below and plugged the switch back in./ It is ziptied out of sight down by the knee bolster

 

[smkshw]

This is how I tricked out my sound system, mounted amp with zip ties with tiny holes through the carpet flap. One 12" sub and box, both from best buy. It ROCKS my hatchback real nice!!! Installed kitchen latches on the rear side panels to hold the wood cover. Will repaint it soon cause I ran out of paint and time. I did buy a black pull out privacy cover but I'm afraid the sub will make it rattle and it may not hide the amp and set up enough, jury still is out doing that way, but it SOUNDS Amazing like this

cutting and gluing the pony carpet on top of that would probably look good also...

 

[Grabbin' Asphalt]

cutting and gluing the pony carpet on top of that would probably look good also...

I had suede wrap but the heat I guess made it weak from the sun, maybe stapled in would woek better with glue. Still learning this sh!t hahaha

 

[Audiophile]

This is how I tricked out my sound system, mounted amp with zip ties with tiny holes through the carpet flap. One 12" sub and box, both from best buy. It ROCKS my hatchback real nice!!! Installed kitchen latches on the rear side panels to hold the wood cover. Will repaint it soon cause I ran out of paint and time. I did buy a black pull out privacy cover but I'm afraid the sub will make it rattle and it may not hide the amp and set up enough, jury still is out doing that way, but it SOUNDS Amazing like this

Cool man. To me, a great sounding stereo always enhances the drive!

 

[smkshw]

staples would probably work better ya....jack of all trades we all are!...lol

 

[Audiophile]

I had suede wrap but the heat I guess made it weak from the sun, maybe stapled in would woek better with glue. Still learning this sh!t hahaha

I've used 3M spray adhesive that you can buy at Lowe's, Home Depot, or online at Parts Express, for the last 20 some odd years. I don't skimp on it, but don't overdo it either. Spraying both the fabric of choice and the wood (or other surface to apply to), and letting it set for a minute or two to become tacky is definitely key. And yes, for more difficult materials to work with, such as vinyl, I always use staples on the back side. It especially helps with material that needs to be stretched.

 

[gearheadboy]

Cool thread. Walks in, looks around, walks out. In my best "Arnold" voice..."I'll be baack".

 

[89stang1]

couple of my favorite trick pics

 

[madspeed]

Great job, I do prefer that black vacuum caps on the wiper arms, they blend in nicely

 

[Grabbin' Asphalt]

couple of my favorite trick pics

I feel like your intake is alive and eye balling me bad@ss!!!

 

[89stang1]

I feel like your intake is alive and eye balling me bad@ss!!!

Thanks bro! LMFAO! if u thought it was eye balling u before dont look into the red circle lol

 

[Onefine88]

Interesting, least put your other pics here, others over seas or away from current online content can look later. Besides you got some pretty great personal trick outs!! May redo my trunk cover now cause of your pic...lol

OK you twisted my arm. Here's a few of my own little personal touches on my car.


My intake plate: Made from a modified stock plate.

My trunk liner: Its made to mimic the panel on the inside of the Fox hatchbacks. I won the little horsey decal as a door prize at a Mustangs Unlimited car show. It fit nicely

Here's a little detail I stole from the newer model GT's ect. I painted the fog light holes trim black, Looks clean I think.

 

[Grabbin' Asphalt]

Thanks bro! LMFAO! if u thought it was eye balling u before dont look into the red circle lol

Holy F@cking sh!t
I'm gonna' go make my Cobra intake do some eye balling
When I looked at that pic, I was literally sitting in my chair afraid to make the slightest move before a Laser was about to come through my screen and fry my @ss
One of the coolest pics I've ever seen

 

[89stang1]

Holy F@cking sh!t
I'm gonna' go make my Cobra intake do some eye balling
When I looked at that pic, I was literally sitting in my chair afraid to make the slightest move before a Laser was about to come through my screen and fry my @ss
One of the coolest pics I've ever seen

LMFAO!!!

 

[89stang1]

Great job, I do prefer that black vacuum caps on the wiper arms, they blend in nicely

WHATA no shinny sheot? ....i never thought of black vacuum cap good idea trust me it took me a while to get on board with my billet hood nipples but ah soon as i added the billet hoodpins i love it now