Power Brakes???

Guero

Active Member

Oct 11, 2005

2,148

0

47

Jun 6, 2006

#1

• Jun 6, 2006

• #1

Ok my friend with an fox 5.0, swapped out his stock lower and upper, for my edelbrook intake. he pluggede and unplaugged whatever it needed to make it work, so my quistion is, he idle fine, but he has no pwer brakes, well the pedal is real hard. what could had happen? he pulled codes and come up with Hego sensor to low, and an egr code.

 

SeventyMach1

Keep it lubed .... keep it straight .... and keep

Mar 30, 2005

1,940

3

36

North Carolina

Jun 6, 2006

#2

• Jun 6, 2006

• #2

I don't think the EGR or o2 codes are relevant to the brake problem. Tell him to check all the vacuum line's on the intake, the vacuum tree, the brake booster .... everywhere.

 

HISSIN50

"How long does it take to get help in here?

15 Year Member

Nov 29, 1999

31,179

33

129

Jun 7, 2006

#3

• Jun 7, 2006

• #3

Agreed with Justin. Check overall vacuum readings - power brakes normally need double digit vac to operate properly. A bad check valve is another possibility.

He can apply vac directly to the booster (with a Miti vac) to see if the pedal gets softer.

 

Guero

Active Member

Oct 11, 2005

2,148

0

47

Jun 7, 2006

#4

• Jun 7, 2006

• #4

kool thanks guys ill let him know.

 

Guero

Active Member

Oct 11, 2005

2,148

0

47

Jun 8, 2006

#5

• Jun 8, 2006

• #5

problem fixed, one of the lines were disconnected, workes fine, but he just noticed it wont down shift when he punches, or goes all the way tru the rpms.