• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2.3L (N/A & Turbo) Tech

power problem

  • Thread starter Thread starter 91redlxhatch
  • Start date Start date Jul 21, 2004

91redlxhatch

New Member
Aug 30, 2003
54
0
0
North carolina
Jul 21, 2004
#1
  • Jul 21, 2004
  • #1
ok..heres my problem.. my car voltage has been sitting at like 10 volts for the past couple days. so i was driving home and my cars lights and power shut off.. i let it sit then i tried to start it and t started on the first try... but still sitting at 10 volts...so i bought a new battery and and battery cables..still nothing.. does anyone know whats wrong or have ever had this?? could it be the alternator
 

mr_woodster

Active Member
Jul 28, 2003
1,314
0
36
Riverside, CA
Jul 22, 2004
#2
  • Jul 22, 2004
  • #2
put a volt meter on the battery when the car is running, it should read 13-14 volts if not your altanator is bad.
 
R

Rerun

Founding Member
Mar 31, 2002
312
0
16
South Bay, California
Jul 22, 2004
#3
  • Jul 22, 2004
  • #3
Sounds like your alternator or the voltage regulator. Probe the harness on the alternator, make sure you're ignition wire is hot. I had the same problem recently, turns out the ignition wire wasn't working. Just a thought.

Good luck.
 

JamesBaumann

Member
Nov 26, 2003
624
0
16
Vancouver Island
Jul 22, 2004
#4
  • Jul 22, 2004
  • #4
Definitely sounds like an alternator problem to me. You can probably take it into your local auto parts store and they'll test it for you for free. But by the sounds of it, it is your alternator. Having power loss is a very common symptom of a bad alternator.
 

stang2.3t

New Member
Jun 25, 2004
74
0
0
Spokane Washington
Jul 22, 2004
#5
  • Jul 22, 2004
  • #5
JamesBaumann said:
Definitely sounds like an alternator problem to me. You can probably take it into your local auto parts store and they'll test it for you for free. But by the sounds of it, it is your alternator. Having power loss is a very common symptom of a bad alternator.
Click to expand...

I too have recently had a similar problem. The altenator is really easy to pull just two bolts a wire harness and a belt. Takes all of 10 min. Take it to your parts store they will be able to test it right there.
 
You must log in or register to reply here.

Similar threads

E
2007 GT Stalls when lights or a/c turned on
  • ejscarfo
  • Jun 22, 2026
  • 2005 - 2009 Specific Tech
Replies
2
Views
145
2005 - 2009 Specific Tech Jun 29, 2026
ejscarfo
E
Electrical Issues with my 2006 mustang gt
  • VerneVdV
  • May 22, 2026
  • 2005 - 2009 Specific Tech
Replies
0
Views
101
2005 - 2009 Specific Tech May 22, 2026
VerneVdV
Distributor installed wrong
  • djj62478
  • Jun 14, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
4
Views
211
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 21, 2026
CAMTWO1070
M
2004 v8 convertible
  • Mikeycrownvicluver
  • Feb 12, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
11
Views
374
1996 - 2004 SN95 Mustang -General/Talk- Feb 15, 2026
Mikeycrownvicluver
M
C
Stock 1993 charging issue at idle
  • Charlie1
  • Sep 21, 2025
  • Fox 5.0 Mustang Tech
Replies
7
Views
370
Fox 5.0 Mustang Tech Sep 24, 2025
Mustang5L5
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2.3L (N/A & Turbo) Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?