• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Power window Problem

  • Thread starter Thread starter gcwh02
  • Start date Start date Jul 24, 2007

gcwh02

New Member
Jun 20, 2005
515
0
0
pottstown, PA
Jul 24, 2007
#1
  • Jul 24, 2007
  • #1
its an 89 vert. My power windows do not work on the whole car. The fuse is still good in the fusebox. I heard something about a circuit breaker before?? Any info on what I could do to get this working

Thanks, Greg
 

85Vertible

New Member
Jun 1, 2007
41
0
0
Jul 24, 2007
#2
  • Jul 24, 2007
  • #2
You really need a wiring diagram and just trace things down.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Jul 24, 2007
#3
  • Jul 24, 2007
  • #3
As I recall, you should have a circuit breaker in the fusebox itself (not a fuse). I'd double check that situation. Then start checking in/out voltage at the switch.
 

gcwh02

New Member
Jun 20, 2005
515
0
0
pottstown, PA
Aug 12, 2007
#4
  • Aug 12, 2007
  • #4
Well I just took off my door panel and I looked at the wires going to my switch.. One of the wires melted to where it should go in the switch. If that doesn't work, would it cause all the windows in the car not to work??
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Aug 12, 2007
#5
  • Aug 12, 2007
  • #5
Was it the feed wire to the switch? If so, repairing that might be all that's needed. Otherwise, who knows if other wires didnt also melt.
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Aug 12, 2007
#6
  • Aug 12, 2007
  • #6
Diagram courtesy of Tmoss & Stang&2birds

See the following website for some help from Tmoss (diagram designer) & Stang&2Birds (website host) for help on 88-95 wiring http://www.veryuseful.com/mustang/tech/engine/ Everyone should bookmark this site.

Ignition switch wiring
http://www.veryuseful.com/mustang/tech/engine/images/IgnitionSwitchWiring.gif

Fuel, alternator, A/C and ignition wiring
http://www.veryuseful.com/mustang/tech/engine/images/fuel-alt-links-ign-ac.gif

Complete computer, actuator & sensor wiring diagram for 88-91 Mass Air Mustangs
http://www.veryuseful.com/mustang/tech/engine/images/88-91_5.0_EEC_Wiring_Diagram.gif

Vacuum diagram 89-93 Mustangs
http://www.veryuseful.com/mustang/tech/engine/images/mustangFoxFordVacuumDiagram.jpg

HVAC vacuum diagram
http://www.veryuseful.com/mustang/tech/engine/images/Mustang_AC_heat_vacuum_controls.gif

TFI module differences & pinout
http://www.veryuseful.com/mustang/tech/engine/images/TFI_5.0_comparison.gif
 

Attachments

  • mustang87-92%20PowerWindowWiring.gif
    52.2 KB · Views: 190

gcwh02

New Member
Jun 20, 2005
515
0
0
pottstown, PA
Aug 15, 2007
#7
  • Aug 15, 2007
  • #7
HISSIN50 said:
Was it the feed wire to the switch? If so, repairing that might be all that's needed. Otherwise, who knows if other wires didnt also melt.
Click to expand...

No it is a wire that feeds the power to the lock. So I have no clue why my windows do not work anymore. Any suggestions? Its for a convertible, I know the switches are different.
 

gcwh02

New Member
Jun 20, 2005
515
0
0
pottstown, PA
Sep 6, 2007
#8
  • Sep 6, 2007
  • #8
No juice to motor

I went out with my volt meter and checked what I could. The circuit breaker in the fuse box is getting juice. The power wire going to the p/w motor is getting no juice. None of the wires on the switch are getting juice (including the lock buttons). Is there a relay somewhere along that wire that could of crapped on me? Any help would be appreciated
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Sep 6, 2007
#9
  • Sep 6, 2007
  • #9
Testing the motor can be tough because you need the switch and wiring to be intact and you need to be pressing the switch.

If you can restore the power to the switch, then testing the rest of the system (if needed) becomes easier.

No relays that I know of. IIRC, you will find the main PW and (for sure) the PDL wiring connectors at the top of the driver kick panel (remove the panel and you see them near the top of where the panel would be). I might do some testing there.

Good luck.
 

Bottomlesspit

I started the longest tech thread in the known uni
Founding Member
Jan 1, 1999
2,636
2
48
Del Rio, TX
Sep 7, 2007
#10
  • Sep 7, 2007
  • #10
On the verts the circuit breaker you mentioned is the rectangular silver box mounted on the rear stud of the starter solenoid in the engine compartment. I had that go bad on my 93 vert and my windows stopped working.
I don't recall now where I purchased a new one...Ford or Auto Zone? That would definitely cut the power to your whole window system.
Hope this helps,
Ken
 

Shakerhood

20+ Year Stangneter
Oct 28, 2004
3,361
211
114
Ohio
Sep 8, 2007
#11
  • Sep 8, 2007
  • #11
I dont have a Vert but have that same small box on my Starter Solenoid and I thought I remember reading in my Service Manual that it was a Breaker or Relay for the P/Ws.
 
You must log in or register to reply here.

Similar threads

D
Electrical Weird door wiring issues
  • Dakar09
  • Oct 20, 2026
  • Fox 5.0 Mustang Tech
Replies
4
Views
207
Fox 5.0 Mustang Tech Oct 21, 2026
Dakar09
D
Paint and Body Door Latch Issue
  • KRUISR
  • Oct 9, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
277
Fox 5.0 Mustang Tech Oct 15, 2026
General karthief
Electrical ’86 Mustang – Power Windows/Locks Dead After Terminator X Swap
  • 5.0 Mike
  • Aug 21, 2025
  • Fox 5.0 Mustang Tech
Replies
0
Views
309
Fox 5.0 Mustang Tech Aug 21, 2025
5.0 Mike
89 power window issue
  • Creomod
  • Sep 5, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
14
Views
788
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 4, 2025
WillWho?
W
G
Resolved Smoking Wiring Issue After GT40 Head Swap
  • Grapes
  • Aug 15, 2026
  • Fox 5.0 Mustang Tech
Replies
17
Views
599
Fox 5.0 Mustang Tech Aug 22, 2026
Grapes
G
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?