powerdyne blower questions

stanger9410 · Oct 12, 2011

i recently posted a thread about my blower install. i didnt get a lot of questions answered so ill go more into depth with my questions and hopefully ill get more help

so i have a blower for a fox body, kurt said that the bracket for the blower for the 93 and 94 are different. so im wondering if we can alter the bracket to fit my car.

also what else am i gonna need to get to install the blower if it fits that is. any help and knowledge is greatly appreciated!

VibrantRedGT · Oct 12, 2011

You may be able to find 94-95 brackets out there to convert it. Try searching and see what you can dig up. There has to be Powerdyne parts lying around somewhere, it's not the most sought after blower.

Don't know what else you've done to the car but if it has heads, cam, intake, exhaust and you're slapping a blower on then you will need to upgrade the fuel system for sure, bigger injectors and bigger fuel pump. Its usually a must when adding more air to the motor, you'll need the fuel to feed the extra air. Probably a good idea to get an ignition box while your at it, not a must, you can do that afterwards.

stanger9410 · Oct 12, 2011

all i have done is a 95 cobra intake with 24lb injectors, the MAF to go with it and a cold air and exhaust. im gonna run low boost with the blower and even if i do blow it up it gives me the excuse to build something real nasty

revhead347 · Oct 12, 2011

You might be able to build a bracket if you are handy with a welder.

Kurt

stanger9410 · Oct 13, 2011

Ok so once i get the bracket worked out will the tube to the MAF to the blower work the same as the fox body or will i need to find one for the sn-95?

revhead347 · Oct 13, 2011

Yeah, the blower itself will work the same. So long as it's mounted the same direction it will pump air. Both engines rotate the same way.

Kurt

ProKiller · Oct 14, 2011

we might be able to help better with pictures. there aren't many of us on here that have powerdyne blowers.

stanger9410 · Oct 14, 2011

pictures would help, so the tube from the MAF to the blower is the same in both body styles?

powerdyne blower questions

stanger9410

Member

VibrantRedGT

"STANGNET'S PENGUIN SMACKER"

stanger9410

Member

revhead347

Apparently my ex-husband made that mistake.

stanger9410

Member

revhead347

Apparently my ex-husband made that mistake.

ProKiller

stanger9410

Member

Similar threads

powerdyne blower questions

Member

"STANGNET'S PENGUIN SMACKER"

Member

Apparently my ex-husband made that mistake.

Member

Apparently my ex-husband made that mistake.

Member

Similar threads

Privacy & Transparency

Privacy & Transparency