Pro-M Flow Data

[ninety15.0]

Hey guys, Im looking for the specific MAF transfer function for the chrome 75mm pro-m MAM. I need the average voltage vs flow in Kg/hr. Im looking for this for inputing it in my tweecer tune. I already have a 75 mm pro-m transfer function but i wanted to compare that to my exact mas air meter. If anyone has their flow data sheet or has any resources for obtaining them...please let me know. VRI stang? Im lookin for ya buddy. Thanks in advance.

 

[go4it]

Here is the paper that came with my 75mm chrome meter, maybe the file will work. If it doesn't I will e-mail it to you.

 

[ninety15.0]

Thanks for the file. I think that the flow data is different for your 42 pound injectors than it would be for my 24's though right. Maybe i should just call pro-m or Pmas tomorro and see what they have to say about the situation. Hopefully they still have that information on file for that meter. Thanks again for the help!

 

[ninety15.0]

Does anyone else have their original paperwork for a 75mm chrome pro-m meter...preferably one calibrated to 24 pounders?! Thanks in advance!

 

[5spd GT]

Hey man, I got my data sheet for my 75mm Pro-M Bullet (chrome), but it's for 30lb injectors I can either mail you a copy of it tomorrow or whatever, or see if I can get my scanner to work???

I know Paul, killercanary, had 24 lb injectors and a chrome 75mm Bullet, and I think he still has it. You might try PM'ing him to see if he has got the data for you

 

[ninety15.0]

5spd...thanks for the help man. I just dont know if the MAF transfer is the same if cal'd to different injectors. I have a feeling that the target flow rates may be the same but the average voltages for thos flow rates may be different. I would think that since the voltages are what's used to differentiate one injector size from another (given the same meter size) that the MAF transfer would look slightly different. Thanks for the heads up for about killlercanary's setup, i think i'll PM him to see if he still has his data! Thanks again man