(Probably stupid) Gears Question

C

criticman

Member

Sep 7, 2003

723

1

16

Rome, GA

Nov 1, 2004

#1

• Nov 1, 2004

• #1

Alright, this may be stupid, but I am willing to accept that if it is...

I bought 3.55's. I have nowhere near the setup at my college housing to install them myself. If I take them to a shop to get installed, will they have all of the necessary parts? Or do I need to purchase one of the $75-125 installation kits online and take that with me to the shop?

 

J

jd351

Founding Member

Feb 20, 2002

163

1

0

Everett, WA

Nov 1, 2004

#2

• Nov 1, 2004

• #2

Any shop qualified to do the install will have the parts or can obtain them easy enough. Usualy most shops would like that you buy some or all of the parts from them anyway. But that's not a stupid question.

 

PhLoBuS

New Member

Aug 15, 2004

473

0

0

Beverly, MA

Nov 1, 2004

#3

• Nov 1, 2004

• #3

you need the installation kit

 

C

criticman

Member

Sep 7, 2003

723

1

16

Rome, GA

Nov 1, 2004

#4

• Nov 1, 2004

• #4

PhLoBuS said:

you need the installation kit

Click to expand...

Any suggestions as to which one? I've seen them in a varied range of prices, various manufacturers, and different items included.

I want a kit that will make sure it gets done right the first time.

 

willys1

Active Member

Dec 2, 2003

1,004

1

36

New Jersey

Nov 1, 2004

#5

• Nov 1, 2004

• #5

You dont need the kit,,just give the shop everything you bought.There gonna charge you minimum 200 beans for the install!!

 

4dStang

Banned

Oct 23, 2002

718

1

0

Near St Louis, Missouri

Nov 2, 2004

#6

• Nov 2, 2004

• #6

I bought the install kit, crush sleeve and gears. I saved some beans. My install of 3.73's cost $150 and they even through in the fluid and friction modifier.

I got my install kit without bearings from Randys ring and pinion for like $50 bucks shipped.

 

MustangMulch

New Member

Mar 27, 2003

303

0

0

Santa Clarita, CA

Nov 2, 2004

#7

• Nov 2, 2004

• #7

I bought this kit right here for $80:

http://www.buyfordracing.com/Shop_Cart/shopexd.asp?id=262

I am getting my 3.73's installed on Wednesday. I thought it would be smart to get that install kit. It might have some unnecessary parts, but it can't hurt to change them out for new ones anyway.

 

crazypete

All my crevices are greased.

Oct 22, 2004

930

4

18

Arlington, MA

Nov 2, 2004

#8

• Nov 2, 2004

• #8

Any shop worth their $$$ will have shims on hand or they will know where to get them. If these are FMS gears, they are so easy to install, you could probably just toss them in, torque the pinion nut and they will work. I installed some 3.73's myself reusing existing shims and just torqued the pinion nut down till I felt a bit of drag, took it for a drive, heard some noise, got back down there, 1/2 turn, still a little noise, one more 1/4 turn, silent. One and a half years later, I replace them with 4.56's professionally installed for almost $300 and my 3.73's didnt have any wear on them whatsoever. The shop basically gave me back the install shim kit that came with the gears since they had shims and such just sitting around. Ask the shop first before you spend the $$$