Problem with FMS Racing sparkplugs...

I used the one longer wire that has duplicate ends. I wrapped it around my distributor to take up the slack.

i bought a blue MSD coil wire for like 10 bucks. it fits nice and snug. i could get you the part number if you really want it; email me at mskawi1@uic.edu.

I sent My FMS wires back to Summit cuz of the coil wire and they sent me two #6's and no #5. They upgraded me to a set of Taylors and they are really alot nicer!

If you bought the kit brand new it will come with two extra wires. The one in the pic is for old style coils. The other is a regular plug wire with a number on it. I think #5 or #3. It will snap onto the coil if you press hard enough.

If you decide to sale them b/c they are to long get some Taylor's. They come with a coil wire that has a groove in one boot. You can pull the plastic clip off the stock coil wire and put it on the new one. It looks just like stock.

Good luck!

Just take the boot and stuff off of your stock coil wire and swap it over to your FMS one. Thats what I did to mine, I also cut the sparkplug wires down to length and havent noticed any problems. Heres the best picture I have of mine...

1105 said:

Just take the boot and stuff off of your stock coil wire and swap it over to your FMS one. Thats what I did to mine, I also cut the sparkplug wires down to length and havent noticed any problems. Heres the best picture I have of mine...

Click to expand...

i did the same thing and its working fine