VT makes some good cams...and Comp Cams we have been having really good succes with them aswell. One thing you need to think about is if you are wanting to upgrade springs or not. I would look at VT's stage 1 or What I have been selling a lot is: Comps: stage 3 non-pi cam......part number: 102300 or you can look them up as the grind number: XE274H. With them you wont have to upgrade the springs. I havent had a chance to try any of the Crane cams out yet. But they seem to have a pretty good selection too. I would look at either comp or VT for sure though...let me know if I can help out anyway...Hope this has helped a little...Good luck.