Sorry man. I just put new map pockets in it and I completely cleaned the whole thing. Everything in the interior is shiny and clean. I just have that last dash molding to install, because I'm lazy and haven't driven the car since August 17th.
Okay, this weekend!!! I promise! I'll get my ass to work, and I'll cut the last two dash peices, and I'll snap pics and post them in here!! I promise! I have nothing to do Saturday.
In the last pic, notice I mounted the factory Fox Body hood release cable to the SN95 dash. I also placed the mirror switch in the speedo bezel. The door handles are in factory Fox location. I just nipped about 1/4" off of each handle to clear the SN95 dash. They open just fine. You can only get a finger or two in the fox handles anyways, and that's what you can get into these. If doesn't effect anything. The defrost works too!!
Looks excellent how many hours would you say you have in this mod? I think with this style dash you have to mock up the sn95 door panels because they flow together. I think it looks great though.
thanks guys! I have seen one person who customized SN95 panels to fit a fox door....LOTS of hours, filler, patience and work.
I personally have around 10 hours in the dash swap itself, then I had to make the a/c heater box work. If I had to do it again, I know the ins and outs, so I could do it all in a few hours.
Thats not too bad. It seems like it would take longer. Does the dash have the same mounting points as the fox dash? Did you have to make any custom brackets and if so what for?